Replaces

1992-1996 Ford F250 Truck Manual Window Regulator Front Pair

Part Details

  • Operation: Manual
  • Location: Front
  • Quantity: Pair

This part replaces:

  • OE # F4TZ-1523201-A
  • DORMAN 740-868
  • OE # F4TZ-1523200-A
  • DORMAN 740-869

  • New

These window regulators are complete, ready to bolt on, direct replacement parts. They are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT DOORS
  • Designed to replace original units that are worn out or broken
  • Manual operation
  • New, not rebuilt
  • Direct bolt on replacements
  • Built to strict quality control standards

We have noticed that there are many inferior quality window regulators on the market. We have researched other manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket regulators available. So don't be fooled by cheaper made imitation regulators. Go with superior quality!

Replace your rusting or broken window regulators now with these great fitting alternatives. They make great replacements and have substantial cost savings over the dealer units.

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:00 in the video)
    • Lift the cover off of the window crank
    • Remove the Torx screw
    • Pull the handle off
    • Remove the Phillips head screw at the front top corner of the door panel
    • Remove the Phillips head screw inside the door pull
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove four screws from the speaker
    • Pry off the speaker cover
    • Disconnect the speaker wiring lead
    • Carefully peel off the water shield
  2. Removing the Window Regulator (3:01 in the video)
    • Remove the three rivets from the regulator with a hammer and punch
    • Drill out the middle of the rivets with a 5/16 or 3/8 drill bit while applying light pressure
    • Slide the regulator out of the window track
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Pull the window regulator out through the door
  3. Reinstalling the Regulator (6:15 in the video)
    • Push the regulator into the door
    • Slide the arm of the regulator into the window track
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert one of the three 10mm M6 metric bolts to the regulator
    • Hang the regulator by its bolt
    • Insert the window crank on the door
    • Crank the window up
    • Remove the window crank
    • Insert the two 10mm bolts to the regulator
    • Insert the window crank
    • Test the window
  4. Reinstalling the Door Panel (11:06 in the video)
    • Put the water shield into place
    • Connect the speaker wiring lead
    • Put the speaker into place
    • Insert the four screws into the speaker
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw at the front top corner of the door panel
    • Insert the Phillips head screw inside the door pull
    • Replace the window crank
    • Replace the Torx screw on the window crank
    • Push the cover onto the window crank

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • 5/16 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Center Punch
  • Hammer
  • Putty Knife

  • Torx Drivers & Sockets

  • T20 Torx Driver

How-to Video:

(13:24 min)

Tools List:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • 5/16 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Center Punch
  • Hammer
  • Putty Knife

  • Torx Drivers & Sockets

  • T20 Torx Driver



This part replaces:

  • OE # F4TZ-1523201-A
  • DORMAN 740-868
  • OE # F4TZ-1523200-A
  • DORMAN 740-869

Vehicle Fit

  • 1992-1996 Ford Bronco Manual Window Regulator Front Pair
  • 1992-1996 Ford F150 Truck Manual Window Regulator Front Pair
  • 1992-1996 Ford F250 Truck Manual Window Regulator Front Pair
  • 1996-1997 Ford F250 Truck Manual Window Regulator Front Pair
  • 1997 Ford F250 Truck (over 8500 LB GVW) Manual Window Regulator Front Pair
  • 1992-1997 Ford F350 Truck Manual Window Regulator Front Pair
  • 1992-1997 Ford F450 Truck Manual Window Regulator Front Pair
$75.95
Save 73%
List: $276.65 Save: $200.70
Part #: 1AWRK00271

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est