Replaces

1996-2007 Ford Taurus Heater Blower Motor with Fan Cage

This part replaces:

  • OE # 1F1Z 19805 AA, E8DZ 19834 A
  • HOLLANDER 615-00532B
  • PARTSLINK FO3126105

  • New

This Ford Taurus & Mercury Sable blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 1F1Z 19805 AA, E8DZ 19834 A, 1F1Z19805AA, E8DZ19834A
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

Effective June 23, 2014: This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Access the blower motor resistor
    • Remove the lower vanity panel under the glove box and set aside.
  2. Step 2: Rremove the Heater A/C blower motor
    • Use your 8mm socket and extension and ratchet to remove the three bolts around the motor.
    • Pull down your glove box by opening it and pushing in on the sides to access the bolts easier.
    • Pull the motor down.
    • Unplug the wiring harness from the motor.
  3. Step 3: Install the new Heater A/C blower motor
    • Install the blower motor and plug everything back in.
    • Bolt the motor back in with your 8mm socket and ratchet.
    • Plug everything back in.
    • Test and replace the vanity cover, clicking the push clips back into place.

How-to Video:

(06:06 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket



This part replaces:

  • OE # 1F1Z 19805 AA, E8DZ 19834 A
  • HOLLANDER 615-00532B
  • PARTSLINK FO3126105

Vehicle Fit

  • 1996-2007 Ford Taurus Heater Blower Motor with Fan Cage
  • 1996-2005 Mercury Sable Heater Blower Motor with Fan Cage
$64.45
Save 54%
List: $140.56 Save: $76.11
Part #: 1AHCX00049

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est