Replaces

2003-2004 Ford Mustang Mach 1 Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with ABS

Part Details

  • Front / Rear Location: Front

  • New

This front wheel bearing/hub assembly, brake rotor, & brake pad set is just what you need to get your vehicle in good stopping order again!

Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • No core charge
  • Professional Grade Ceramic Enhanced Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: XR3Z-1125-BC, XR3Z1125BC
  • Fit 5 Lug Wheels
  • Fit Bullitt, Cobra, and Mach 1 Models only
    • Do NOT fit V6 Base or GT Models

Wheel Bearing & Hub Assembly Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 1R33-2B633AA1R3, 1R3Z-1104-AA, 1R3Z-1104-BA, F4CZ-2B663-AB, F4CZ-2B663-AC, F4ZZ-1104-A, F6ZC-2B663-AA, F6ZZ-1104-AA, F8ZC-2B663-AA, F8ZZ-1104-AA, YR33-2B663-AA, YR33-3C300-AA, YR3Z-1104-AA, YR3Z-1104-BA, 1R332B633AA1R3, 1R3Z1104AA, 1R3Z1104BA, F4CZ2B663AB, F4CZ2B663AC, F4ZZ1104A, F6ZC2B663AA, F6ZZ1104AA, F8ZC2B663AA, F8ZZ1104AA, YR332B663AA, YR333C300AA, YR3Z1104AA, YR3Z1104BA
  • Come with ABS Tone Ring Sensors already installed
  • Fit 5 Lug Wheels
  • Studs already installed

This wheel bearing/hub assembly, brake rotor, & brake pad set makes great replacements and has good value over the price of dealer parts.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove front wheel. (1:06)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your lug wrench to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your lug wrench.
    • Remove the wheel and set aside.
  2. Step 2: Remove the front brake calipers (1:30)
    • Use a screwdriver to force the pistons back in.
    • Remove the three 3/8 Allen bolts to remove the calipers.
    • Clean out the Allen bolts if needed.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new brake rotor and pads (3:45)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the front brake caliper.
    • Compress the front brake caliper piston with a c-clamp to reset the pistons.
    • Mount the front brake caliper and torque the 3/8 Allen bolts in as tight as they will go by hand.
  4. Step 5: Put your front wheel back on (8:14)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brake pads and rotors (6:30)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:09 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket




Vehicle Fit

  • 1999-2004 Ford Mustang Cobra Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with ABS
  • 2003-2004 Ford Mustang Mach 1 Front Wheel Hub & Bearing Pair with CERAMIC Brake Pads & Rotors Set for Models with ABS
$145.45
Part #: 1ABMS00028

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est