Replaces

1983-1997 Ford Mustang Fuel Tank with Strap Set for Fuel Injected Models 15.4 Gallon

  • New

This gas tank has the following specifications:

  • Capacity: 15.4 gallons
  • Includes mounting strap set
  • Overal dimensions: 42 1/2" x 19 1/4" x 10 3/4
  • 2 gauge holes
  • Lock ring sets included
  • Anti splash shield installed for fuel pump
  • Direct bolt in
  • Built to strict quality control standards
  • Fits EFI (electronic fuel injected) vehicles only

 

48 States Only:

Due to shipping restrictions, we can only ship this to a physical address within the Continental U.S. (48 States).

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Scratches and Dings

Due to the nature and size, a fuel tank may incur minor dents or scratches from handling and load shifting during shipping. These damages do not affect the fit or function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these insignificant damages.

  1. Beginning the Repair (0:37 in the video)
    • This is Part 2 of a two part video
    • Please consult Part 1 for earlier instructions
    • Follow the steps outlined in Part 1
  2. Preparing the Tank (0:59 in the video)
    • Use a wire brush to clean the fuel sending unit settings
    • Unplug the sending unit lines
    • Use a hammer and chisel to loosen the lock ring tabs
    • Remove the lock rings
    • Remove the sending units
    • Remove the sending unit grommet
  3. Installing the Sending Units in the New Tank (3:01 in the video)
    • Attach the grommet, keeping dirt out of the tank
    • Insert the new O-ring for the first sending unit
    • Line up the sending unit tabs with the tank slots
    • Put in the sending unit
    • Attach the lock ring underneath all three tabs
    • Use the hammer and chisel to push the lock ring tabs into place
    • Insert the new O-ring for the second sending unit
    • Line up the sending unit tabs with the tank slots
    • Put in the sending unit, making sure the hoses are placed correctly
    • Attach the lock ring underneath all three tabs
    • Use the hammer and chisel to push the lock ring tabs into place
    • Insert the fuel filler neck grommet
  4. Replacing the Fuel Tank Straps (6:08 in the video)
    • Hold the first fuel strap
    • Use needle nose pliers to remove the rear fuel strap bolt
    • Remove the fuel strap
    • Repeat for the second strap
    • Insert the longer fuel strap on the passenger side
    • Insert the rear fuel strap bolt
    • Insert the shorter fuel strap on the driver side
    • Insert the rear fuel strap bolt
  5. Installing the New Fuel Tank (6:34 in the video)
    • Reattach the plastic protector and fuel tank padding
    • Position the fuel tank
    • Hold the tank in place with a jack
    • Feed the hoses through the appropriate clips
    • Reattach the electrical connection
    • Hold the tank in place
    • Position one tank strap
    • Hold the strap in place with the jack
    • Position the second tank strap
    • Tighten the front bolt on the strap held by the jack
    • Move the jack to the other strap
    • Tighten the front bolt on the second strap
    • Finish tightening the bolts
  6. Attaching the Connectors (8:31 in the video)
    • Insert the fuel line nylon lock
    • Reattach the fuel lines
    • Attach the lock clamp
    • Drill a hole in the fuel tank weld
    • Bolt the tank to the clamp
    • Bolt the filler neck in place
    • Add fuel to the tank

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 8mm Socket

  • Specialty Tools

  • Block of Wood
  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush

How-to Video:

(10:01 min)

Tools List:

    Drills, Drill Bits & Related

  • Drill

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 8mm Socket

  • Specialty Tools

  • Block of Wood
  • Chisel
  • Floor Jack
  • Hammer
  • Jack Stands
  • Wire Brush




Vehicle Fit

  • 1983-1997 Ford Mustang Fuel Tank with Strap Set for Fuel Injected Models 15.4 Gallon
  • 1983-1986 Mercury Capri Fuel Tank with Strap Set for Fuel Injected Models 15.4 Gallon
$97.95
Save 50%
List: $194.95 Save: $97.00
Part #: 1AFRK00004

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est