Replaces

2000-2005 Ford Excursion Manual Locking Hub Driver or Passenger Side (FORD)

This part replaces:

  • OE # 1C3Z-3B396-DA
  • Motorcraft 1C3Z3B396DA

  • New

Ford/Motorcraft Manual Locking Hub: 1C3Z3B396DA

This wheel hub is an original equipment part! It is the same part that you would receive if you purchased it from your local Ford dealer!

Specifications

  • Brand NEW Ford/Motorcraft Hub
  • Fits either LH (Driver Side) & RH (Passenger Side)
  • Includes 4x4 hub, locking rings, and installation instructions
  • Fits 4x4 vehicles with manual locking hubs only

This manual locking hub is OEM and has good cost savings over the same part from the dealer!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1:Removing the Hub (0:46 in the video)
    • Remove the center cap using a pry bar or screwdriver.
    • Remove the snap ring from the hub.
    • Pull the hub out.
    • If the hub is stuck spray it with penetrating oil and let it sit for a while.
    • Hit it with a rubber mallet from the top and bottom until it loosens and pull it free.
  2. Step 2: Installing a New Hub (2:27 in the video)
    • Clean the inside of the hub with a wire brush.
    • If available use compressed air to spray out the debris.
    • Push the new hub into place.
    • Use a rubber mallet to help the o-ring seat.
    • Put the snap ring on.
    • Replace the center cap.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Rubber Mallet
  • Wire Brush

How-to Video:

(03:59 min)

Tools List:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Rubber Mallet
  • Wire Brush



This part replaces:

  • OE # 1C3Z-3B396-DA
  • Motorcraft 1C3Z3B396DA

Vehicle Fit

  • 2000-2005 Ford Excursion Manual Locking Hub Driver or Passenger Side (FORD)
  • 1999-2004 Ford F250 Super Duty Truck Manual Locking Hub Driver or Passenger Side (FORD)
  • 1999-2004 Ford F350 Super Duty Truck Manual Locking Hub Driver or Passenger Side (FORD)
  • 1999-2003 Ford F450 Truck Manual Locking Hub Driver or Passenger Side (FORD)
  • 1999-2003 Ford F550 Truck Manual Locking Hub Driver or Passenger Side (FORD)
$399.95
Save 5%
List: $421.52 Save: $21.57
Only 5 left in stock
Part #: MCFWH00001

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
MOTORCRAFT
Brand #: 1C3Z3B396DA

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est