Replaces

1987-1991 Ford F150 Truck Factory Installed A/C Heater Blower Motor with Fan Cage

This part replaces:

  • HOLLANDER 615-00514
  • OE # F2TZ 18527 A, FOTZ 18504 A

  • New

This Ford truck and full size Bronco blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: F2TZ 18527 A, FOTZ 18504 A, F2TZ18527A, FOTZ18504A
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Blower Motor
    • Disconnect the blower motor wiring harnesses
    • Unclip the top wiring connector from the blower motor
    • Remove the four 5/16 inch bolts from the blower motor
    • Pull out the blower motor
    • Pull the vent tube off the blower motor
    • Peel off the blower motor gasket, using a razor if necessary
  2. Installing the New Blower Motor
    • Line up the new blower motor gasket
    • Expose the gasket adhesive by pulling off the backing paper
    • Stick the gasket in place
    • Attach the vent tube to the new blower motor
    • Push the new blower motor into place, using the locating tabs
    • Start the top 5/16 inch bolt
    • Put the wiring harness clip into place
    • Insert the 5/16 inch bolt into the wiring harness clip
    • Start the remaining 5/16 inch bolts
    • Tighten the four 5/16 inch bolts
    • Connect the blower motor wiring harnesses
    • Clip the top wiring harness into place

How-to Video:

(06:50 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - SAE

  • 5/16 Inch Socket

  • Specialty Tools

  • Razor Blade / Gasket Scraper



This part replaces:

  • HOLLANDER 615-00514
  • OE # F2TZ 18527 A, FOTZ 18504 A

Vehicle Fit

  • 1987-1990 Ford Bronco Factory Installed A/C Heater Blower Motor with Fan Cage
  • 1991-1996 Ford Bronco Heater Blower Motor with Fan Cage
  • 1987-1991 Ford F150 Truck Factory Installed A/C Heater Blower Motor with Fan Cage
  • 1992-1996 Ford F150 Truck Heater Blower Motor with Fan Cage
  • 1987-1991 Ford F250 Truck Factory Installed A/C Heater Blower Motor with Fan Cage
  • 1992-1996 Ford F250 Truck Heater Blower Motor with Fan Cage
  • 1997 Ford F250 Truck Heater Blower Motor with Fan Cage
  • 1987-1991 Ford F350 Truck Factory Installed A/C Heater Blower Motor with Fan Cage
  • 1992-1997 Ford F350 Truck Heater Blower Motor with Fan Cage
  • 1987-1991 Ford F450 Truck Factory Installed A/C Heater Blower Motor with Fan Cage
  • 1992-1997 Ford F450 Truck Heater Blower Motor with Fan Cage
$60.45
Save 53%
List: $128.82 Save: $68.37
Part #: 1AHCX00106

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est