Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
TRQ side mirrors and mirror components are designed to match the function, fixture, and performance of the original version for easy installation. TRQ mirrors are DOT certified, comply with all federal safety standards, and are independently lab tested to ensure our products comply with all government regulations. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Product Features
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Paint To Match Note:
"Paint-to-match finish" refers to a smooth, paintable surface. This item is not painted. Paint offers better coverage and adhesion, but it is not necessary for installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by one 1AAuto.com. Your source for quality replacement parts and the best service on the internet. In this video we'll be replacing the side view mirror on this 2002 Ford Focus. Same as any 2000 and 2004. The only tool you need is a 13 millimeter socket with a ratchet and an extension.
We're replacing power mirror, on this vehicle has power mirror but replacing mirrors on this car is pretty easy. You just want to pull off this piece of trim. Pull it out and then back. You can see here is the test power mirror. It's my current lead. Push this little tab here, and remove the lid. Push the lid down this here, the store panel. Now, it's a 13 millimeter socket with a ratchet extension. Remove the bolt, slowly pull your mirror off.
You want to carefully either you can see my bolt didn't come out. That's okay. You just want to make sure you push it in there. It doesn't pull down the door. Push the lid out. There's the mirror off. You can see my gasket tore. One outer mirror to go in they have the same connection. You got to come with a new gasket as well. Reinstalling is just the reverse. What I'm going to do is I'm going to put this in. I'm going to push my harness connecting screw. It goes down to a lower hole.
Then it comes up. Okay. Now, what I'm going to use because my bolt is still in there. I'm going to put my socket and extension in. Move along to the bolt and put my mirror into place. Start tightening the bolt. Make sure it got a hold of the mirror. Make sure my harness is all the way through. Tighten up this bolt. You want firm but not too tight. Okay. Now you have your power mirrors. You want to back of this in first. Okay, push it forward and lock it on. That's all there is to it.
We hope this helped you out. Brought to you by www.1AAuto.com. Your source for quality replacement parts and the best service on the internet. Please feel free to call us. Toll free 888-844-3393. We're the company that serves you on the internet, and in person.
Tools used
Tools used
Hey, friends. It's Len here at 1A Auto. Today I'm working on a 2001 Ford Focus, and I want to show you how to do a left front mirror. It's going to be a very easy job and I want to be the guy that shows you how to do it. If you need this or any other part, you can always check us out at 1AAuto.com. Thanks.
Okay, friends. So what we're going to have to do, so we're going to have to remove this little panel right here, has an electrical connector behind there. So when you do pop it off, just make sure you don't go too far. You don't need to pull it all the way out, because, okay. We should actually probably really quick, just make sure we're getting power.
Okay. So we know that it gets power when we install our new mirror. We want to make sure that it works again, obviously. So what I'm going to do, is I'm going to grab this, I'm going to try to pull out this way and then towards the front, because right here there's like little hooks that go this way. And this one right about here has a hook that goes straight in. So I'm gonna grab here, pull out and over. I can show you what I'm talking about. This presses into here, then we've got these little grabbers right on there. Try to set this aside. Right here is our electrical connector.
Just going to use a pocket screwdriver, or you can use your finger--just squeeze right there. Let's see if I can do it. Just push in. And then try to push that to separate it. This connector right here is part of your mirror. It's going to go right, so I'll just push that rubber in. That's going to be ready to go. Okay, so right over here we have a torx bit 20. This is what they look like. It's almost like a little star. Right in the corner. I'm going to go ahead and remove that. Show you what it looks like.
So that's the head. That's the length of the bolt, screw, whatever you want to call it. We'll set this stuff aside. Right on the backside of this, there's a 10 millimeter bolt, and that holds your mirror assembly on. So once you start getting that so it's loose, you're going to want to hold your mirror, so it doesn't fall down, and smash, break into little pieces, anything like that. All you want to make sure you dispose of it properly of course. So I'm going to use a 10 millimeter
Just want to make sure that I get that bolt to stay. Going to grab my small magnet. I'll move that bolt for you. That's what it looks like. Now I'm going to draw this out, just like that. Now we've removed our left front mirror assembly. Easy peasy. So on your old mirror you're just going to grab this little rubber. It's got a little slit for you. We'll take that out. Inspect it. Looks like it's in good condition. Set it aside. We'll recycle this or dispose of it properly. We'll move along.
So here we are. Friends, a quick product comparison for you. Over here we have our original 2001 Ford Focus mirror off the left front door. We just removed it. Over here we have our brand new quality 1 A Auto part. If you spin it, it comes with a brand new seal. That's always really good, you want to make sure you've got a nice seal. You don't want air and everything getting inside your door panel. The original one has it as well. We've got our wiring harnesses, both the exact same, three prong. Super important to make sure those match up.
All the same mounting areas, right. We've got our center hole for the big screw and then this one for the little screw, big screw, little screw. As you could tell, they're both the exact same. This one's just got a little protector on it in case you were wondering what's up with that. Just to protect her for shipping, case it gets dropped and won't break the ear off. They both look the exact same. Like I said, I don't see any reason why this wouldn't be a great part to install onto the vehicle. So I'm going to go ahead and do it. If you need this or any other part, you can always check us out at 1AAuto.com. Thanks.
So now it's time to install our brand new quality 1A Auto part. I'm just going to come around through here. I'm going to bring my wiring through this hole. I'm going to find it when it comes out towards the door panel. Bring it right up now while I can. Here we are. We've got our little rubber grommet here. You just want to press that into the hole while your mirror is still away, it's going to make it much easier. Obviously it will be pretty much impossible if you had the mirror up against it. There we are. Just tug on the slack at the same time as we bring the mirror in.
I'm going to try to line up my holes. There. Right there. We'll get this out of here. It did its job. Thank you. Mirror looks good still. You just want to squeeze along this top corner here, just to make sure that it's in. Once it's in, you should hear it clip in a little bit, and it doesn't want to move at this point. We'll be able to let go. We'll come inside, we've got our big screw. I'm going to use a little pocket magnet, and of course, my tool, just like this. Actually, I'll try it without the magnet first. Just going to come in, try to get my bolt lined up. Hold the mirror.
That's started in. I'm not going to go ahead and tighten it up yet. I want to make sure that I have the other screws started, as well. Super important to make sure you have bolts screws started before you go ahead and tighten anything down. Bolts, screws are started now. We're clear to go ahead and tighten it down. This is just screwing into plastic, so you don't want very much pressure, so I'm going to turn this puppy right down. Not that it's the most powerful anyway, because it's for interior mostly.
Just put that there for now, but I'm going to check outside. It feels like I can go maybe a little bit tighter, so I'll grab my tool. Can do with a ratchet now, see if I can get in here. Like I said, we're just screwing into plastic here. That feels pretty great. I'm going to screw in that center, 10 millimeter. I got it turned way down. I'll just go with the ratchet, that way I can feel it. Get that on the bolt. Now you can wiggle the mirror around while you do this. You should feel like it nice and firm, and all of a sudden your bolt doesn't want to turn anymore. That feels great. Awesome.
We're going to connect this back in. We've got your little area right here that connects into the push clip. Like that. Tuck it away. Going to line up my little squeezy things there. Push those in. Give that a bonk. There we are. I'll grab my key. We're going to check the function. Make sure it's on the left mirror. Looks pretty great. There we are. Easy peasy. Now you just said it so you can see where you need to see, and off you go
Thanks for watching. Visit 1AAuto.com, your place for DIY auto repairs for great parts, great service, and more content.
