2001-2006 Mazda Tribute Smooth Black Exterior Door Handle (Set of 4) for Models with Keyless Entry

Part Details

  • Colors: Black

This part replaces:

  • DORMAN 80256,80257

  • New

These replacement exterior door handles are just what you need to get your vehicle in good form again!


  • Door handle set includes:
    • (1) - LF (Driver Side) Front
    • (1) - RF (Passenger Side) Front for models without a key hole in the handle
    • (1) - LF (Driver Side) Rear
    • (1) - RF (Passenger Side) Rear
  • Comes black
    • can be painted by buyer to match or installed as is
  • Replaces dealer part numbers: 2T2Z7822404BAPTM, 2T2Z 7822404 BA PTM, 2T2Z78218B08, EC0258413HAA, 2T2Z 78218 B08, EC02 58413 HAA
  • Direct replacements
  • Install just as the originals do
  • Built to strict quality control standards

These handles make great replacements and have good cost savings over the individual dealer handles!

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel
    • Remove the T20 Torx screws securing the door panel
    • Pry up the panel in the door pull to expose the bolts underneath.
    • Use your flat blade screwdriver to pry up the bezel around the door latch.
    • Unplug the wiring harness from the lock switch.
    • Uninstall the door latch and disconnect it from the door latch rod.
    • Remove the door panel.
    • Remove the insulator and water shield
  2. Remove the door handle
    • Unbolt the outside door handle and remove the door handle.
  3. install the door handle
    • Clip the door handle back in.
    • Bolt the door handle back into place.
  4. Put the door panel back on
    • Put the water shield and foam insulation back on
    • Replace the door panel, threading through the wiring for the lock switch.
    • Secure into place with T20 Torx screws.
    • Install the door latch, clip in the door latch rod and clip it into place.
    • Plug in the wiring harness to the latch bezel and snap it into place.
    • Replace the remaining screws and snap the door pull panel back together.

How-to Video:

(08:57 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

This part replaces:

  • DORMAN 80256,80257

Vehicle Fit

  • 2000-2007 Ford Focus Smooth Black Exterior Door Handle (Set of 4) for Models with Keyless Entry
  • 2001-2006 Mazda Tribute Smooth Black Exterior Door Handle (Set of 4) for Models with Keyless Entry
Part #: 1ADHS00239

Out of Stock


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est