Replaces

2005-2005 Ford F150 Truck 4WD Front Sway Bar Link Pair (Built Before 11/29/04 Production Date)

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair

  • New

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 4L3Z5K483BA, 4L3Z 5K483 BA
  • Direct replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. These link make great replacements and offer good cost savings over the dealer parts.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:40)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Sway Bar Link (1:15)
    • Apply rust penetrant to the sway bar link nuts
    • Remove the top sway bar link nut with a 21mm socket and ratchet
    • Remove the lower sway bar link nut with an 18mm socket and ratchet
    • If the nut spins, hold the nut with an 18mm wrench and loosen the stud with an 8mm socket and ratchet
    • Remove the 12mm bolts from the axle
    • Push the axle to the side
    • Pull out the sway bar link
  3. Installing the Sway Bar Link (2:43)
    • Put the sway bar link into place
    • Fasten the 21mm nut onto the top of the sway bar link
    • Put the axle into place
    • Insert the 12mm bolts into the axle
    • Tighten the 12mm bolts to 60 foot-pounds of torque in a crossing or star pattern
    • Fasten the 18mm nut onto the bottom of the sway bar link
  4. Reattaching the Wheel (4:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 21mm Socket
  • 8mm Socket
  • 10mm Socket
  • 12mm 12-Point Socket

  • Wrenches - Metric

  • 21mm wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:56 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 21mm Socket
  • 8mm Socket
  • 10mm Socket
  • 12mm 12-Point Socket

  • Wrenches - Metric

  • 21mm wrench
  • 18mm Wrench




Vehicle Fit

  • 2004 Ford F150 Truck New Body Style 4WD Front Sway Bar Link Pair
  • 2005 Ford F150 Truck 4WD Front Sway Bar Link Pair (Built Before 11/29/04 Production Date)
$33.95
Save 73%
List: $127.74 Save: $93.79
Part #: 1ASFK01439

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est