Replaces
Frequently bought together
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
All right, friends, to get started on our fog lamp assembly, we're gonna get underneath the front of the bumper. Once you've done that, go ahead and locate the fog lamp assembly, and we're gonna remove our wiring from it. Got to squeeze, draw it off, inspected it for any funny colors or damage. Set it aside, assuming it's good.
Next, we're gonna remove our mounting nuts. We've got one here, there, and one over there. There were are. We are gonna give this a little push, and then we'll pull it out through the outside of the bumper cover. There it is, friends.
Now, it's gonna be time to install our brand-new fog lamp assembly. It's always a good idea to go ahead and replace the bulb at the same time, so I've got a nice new one in there. I'm gonna insert this from the outside coming in. The hardest part is gonna be lining up those little prongs. Once you get them, it should slide right in.
Let's go ahead and start on those nuts. Now when you tighten these, you wanna be very careful not to overtighten them because they're not actual nuts, but they do actually screw onto the plastic. So, you just wanna make sure they're snug, and then that should be good enough.
Once we have all three mounting bolts tight, let's go ahead and reconnect this. Squeeze it up in there. That feels good. All right, so this looks great. At this point, you would want, of course, to test the fog lamp to make sure it works. You're also gonna wanna align it. This area right here is for the alignment. There's a little Phillips head screw right there. So, once your headlamps are properly adjusted, it'll be time to adjust your fog lamps.
You'll notice on the driver side, the focal point is all the way at the bottom right now. I would like to bring it up so it meets up with approximately the bottom of the focal point of the headlight. Some fog lamps have an adjuster, others don't. The ones that do have an adjuster, you would just turn the adjustment to the left or to the right to adjust the beam up and down to where it needs to be.
Now with your TRQ headlamps and fog lamps properly aligned, you can drive down the road safely.
Tools used
