Replaces

1992-1996 Ford Bronco Interior Door Handle Latch Cable Pair

Part Details

  • Location: Interior
  • Quantity: Pair

This part replaces:

  • DORMAN 924-300 x2

  • New

These replacement Ford truck door handle cables is just what you need to get your vehicle in good working form again!

Specifications

  • Fits Driver and Passenger side Front door
  • Reinforced from the original design for better durability
  • Direct replacement for original cable

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Window Crank Handle (1:00 in the video)
    • Pull up the window crank handle cover
    • Remove the T20 Torx screw from the crank handle
    • Pull off the crank handle
  2. Removing the Door Panel (1:39 in the video)
    • Remove the Phillips head screw at the top front corner of the door panel
    • Remove the Phillips screw inside the door pull
    • Pry off the door panel with a door panel clip tool or a putty knife
    • Pull the door panel up and off
    • Peel back the water shield
  3. Removing the Lock Cylinder (2:42 in the video)
    • Pry the latch cable out of the door handle with a flat blade screwdriver
    • Remove the 11mm bolt from the window track
    • Pull the window track forward
    • Remove the lock rod from the plastic clip
    • Pry out the door latch clip with a flat blade screwdriver
    • Pull out the lock cylinder from the outside of the door
    • Twist the lock cylinder off the lock rod
  4. Removing the Latch Mechanism (4:42 in the video)
    • Remove the three Phillips screws from the latch mechanism
    • Pull the latch mechanism out of the door, taking its three rods with it
  5. Disconnecting the Latch Cable (6:12 in the video)
    • Pull off the plastic latch cable covering
    • Pull the latch cable out of the latch mechanism
  6. Installing the New Latch Cable (7:34 in the video)
    • Pull the latch mechanism lever back
    • Twist the new latch cable into the latch mechanism
    • Push on the plastic latch cable housing
    • Make sure the lock rod is positioned alongside the latch mechanism
  7. Reinstalling the Latch Mechanism (9:10 in the video)
    • Push the latch mechanism into the door, hold the rods in place
    • Push the latch mechanism into place
    • Push the lock button into place
    • Start the three Phillips screws into the latch mechanism
    • Connect the latch cable to the door handle
    • Clip the lock rod into place
  8. Reinstalling the Lock Cylinder (11:13 in the video)
    • Push the lock cylinder into place
    • Push in the lock cylinder clip
    • Connect the lock rod to the lock cylinder
    • Tighten the three Phillips screws into the latch mechanism
    • Slide the window track into place
    • Insert the 11mm bolt into the window track
  9. Reinstalling the Door Panel (12:03 in the video)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw at the top front corner of the door panel
    • Insert the Phillips screw into the door pull
  10. Reinstalling the Window Crank Handle (13:10 in the video)
    • Put on the crank handle washer
    • Push on the crank handle
    • Insert the T20 screw into the crank handle
    • Push on the crank handle cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Flashlight
  • Putty Knife

  • Wrenches - Metric

  • 11mm Wrench

How-to Video:

(14:00 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Flashlight
  • Putty Knife

  • Wrenches - Metric

  • 11mm Wrench



This part replaces:

  • DORMAN 924-300 x2

Vehicle Fit

  • 1992-1996 Ford Bronco Interior Door Handle Latch Cable Pair
  • 1992-1996 Ford F150 Truck Interior Door Handle Latch Cable Pair
  • 1992-1996 Ford F250 Truck Interior Door Handle Latch Cable Pair
  • 1992-1997 Ford F350 Truck Interior Door Handle Latch Cable Pair
  • 1992-1997 Ford F450 Truck Interior Door Handle Latch Cable Pair
$35.45
Save 62%
List: $92.75 Save: $57.30
Part #: 1ADRK00013

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est