Ford Brake Pad & Rotor Kit Front - 1ABFS006601ABFS00660
- Location: Front
This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!
Brake Pad Specifications:
- Professional Grade SEMI-METALLIC Disc Brake Pads
- 4 Piece FRONT brake pad set
- Includes shims
- Direct replacements
Brake Rotor Specifications:
- Comes as a PAIR
- Fits LH (Driver Side) & RH (Passenger Side) FRONT
- Replaces dealer part number: F81Z-1125-DA, F81Z1125DA
- Fits 8 Lug Wheels
- 13" Diameter Vented Rotors
This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.
Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Wear and Tear
This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.
Step 1: Remove the Wheel
- Pry the center cap off.
- Loosen the lug nuts.
- Raise the vehicle.
- Remove the lug nuts.
- Remove wheel. (If it is stuck, replace one lug nut and hit the wheel till it brakes loose).
Step 2:Removing the Brakes
- Remove the two bolts on the back of the brake calipers.
- Place a screwdriver in the side of the caliper and pry the brake pistons back in.
- Remove the Caliper.
- Pull the brake pads out and remove the spring.
Step 3: Removing the Rotors
- Remove the two 21mm bolts from the bracket. (Use a breaker bar or piece of pipe for leverage.
- Remove the caliper bracket.
- Spray the studs and hub with penetrating oil and let it sit.
- Pry the disc free from the hub.
Step 4: Replacing the Brakes
- Put the rotor in place.
- Replace the slides in the brake calipers with the new slides.
- Replace the caliper bracket.
- Reinsert the 21mm bolts in the bracket. Torque to 145ft/lbs.
- Put your old pads in the caliper bracket and use a c-clamp to push the pad into the caliper and reset the pistons.
- Wire brush the slides if old, and put them back into place.
- Slide the new pads into place.
- Put the caliper back into place and reinsert the caliper bolts. Torque to 23 - 25ft/lbs.
Step 5: Replace the Wheel
- Put the wheel into place.
- Replace the lug nuts.
- Lower the vehicle and tighten the lug nuts in a crossing pattern. Torque to 120ft/lbs.
- Replace the center cap.
Step 6: Road Test Before Use
- Pump the brakes until they are firm.
- Test stopping from 5mph
- Test stopping from 10mph.
How-to Video:(13:09 min)
- Breaker Bar
- Torque Wrench
- Flat Blade Screwdriver
- Pry Bar
- 16mm Socket
- 17mm Socket
- 21mm Socket
- A Piece of Pipe (for leverage)
- Jack Stands
- Large C-Clamp
- Large Hammer
- Wire Brush
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
- 2000-2005 Ford Excursion 4WD Front Brake Pad & Rotor Kit Semi-Metallic
- 1999 Ford F250 Super Duty Truck 4WD Front Brake Pad & Rotor Kit Semi-Metallic for Models with 13" Diameter Rotors (Built After 3/22/99 Production Date)
- 2000-2004 Ford F250 Super Duty Truck 4WD Front Brake Pad & Rotor Kit Semi-Metallic for Models with 13" Diameter Rotors
- 1999 Ford F350 Super Duty Truck 4WD Front Brake Pad & Rotor Kit Semi-Metallic for Models with 13" Diameter Rotors (Built After 3/22/99 Production Date)
- 2000-2004 Ford F350 Super Duty Truck 4WD Front Brake Pad & Rotor Kit Semi-Metallic for Models with 13" Diameter Rotors
Part #: 1ABFS00660
- Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.