Replaces

2005-2010 Chrysler 300 Fog / Driving Light for Touring or Limited Models

This part replaces:

  • OE # 4805856AA
  • PARTSLINK CH2590109
  • HOLLANDER 116-03310
  • DORMAN 923-800

  • New

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side)
  • Circular Style lamp
  • Replaces dealer part number: 4805856AA, 4805856AB
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Removing the Wheel (0:45 in the video)
    • It is not necessary to remove the wheel, but doing so will make the other steps easier
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Accessing the Fog Light (1:13 in the video)
    • Remove the plastic clip from the splash shield with a flat blade screwdriver
    • Remove the three 7mm bolts from the inner fender
    • Pull off the inner fender
  3. Servicing the Fog Light Bulbs (1:48 in the video)
    • Apply penetrating oil to the fog light bolts
    • Turn the fog light bulb counterclockwise
    • Pull out the fog light bulb
    • Disconnect the bulb from its wiring harness
    • Connect the new bulb to the wiring harness
    • Twist the bulb clockwise into the fog light
  4. Removing the Fog Light (2:16 in the video)
    • Remove the 10mm bolt from the horn
    • Remove the two 10mm nuts from the fog light
    • Disconnect the wiring harness from the fog light
    • Push the fog light forward
    • Pull the fog light up and out
  5. Installing the New Fog Light (3:20 in the video)
    • Thread the two 10mm nuts onto the new fog light
    • Put the new fog light into place
    • Tighten the two 10mm nuts onto the fog light
    • Put the horn into place
    • Insert the 10mm bolt into the horn
    • Connect the fog light wiring harness
  6. Reinstalling the Inner Fender (5:34 in the video)
    • Put the inner fender into place
    • Insert the three 7mm bolts into the inner fender
    • Insert the pin into the splash shield
  7. Reattaching the Wheel (5:55 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench

How-to Video:

(06:36 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 7mm Wrench



This part replaces:

  • OE # 4805856AA
  • PARTSLINK CH2590109
  • HOLLANDER 116-03310
  • DORMAN 923-800

Vehicle Fit

  • 2005-2010 Chrysler 300 Fog / Driving Light for Touring or Limited Models
  • 2006-2009 Chrysler PT Cruiser Fog / Driving Light
  • 2009 Dodge Journey Fog / Driving Light
  • 2005-2008 Dodge Magnum Fog / Driving Light
  • 2007-2010 Jeep Wrangler Fog / Driving Light
$43.45
Part #: 1ALFL00223

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est