Replaces

1998-2005 Chevy Blazer S10 Exterior Door Handle Front Pair

  • New

These replacement exterior door handles are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Black textured finish
  • Durable construction
  • Steel center rod and return spring
  • Direct replacements for original handles
  • Do not fit rear doors

These exterior door handles are direct bolt on and are built to strict quality control standards. They are great replacements and have substantial cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:20 in the video)
    • Using a paperclip pry out the clip behind the window crank.
    • Remove the Phillips screw behind the door handle.
    • Remove the door handle bezel.
    • Remove the two 10mm bolts under the door pull.
    • Use a putty knife to pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Pull back the water shield.
  2. Removing the Exterior Door Handle (2:21 in the video)
    • Make sure the window is all the way up.
    • Remove the plastic cap on the outside edge of the door.
    • Remove the two 10mm bolts on the backside of the door handle.
    • Reach up on the inside of the door and push the rod out of the clip.
    • Pull the door handle out and disconnect the other rod.
    • Pull the door handle out.
  3. Replacing the Exterior Door Handle (5:00 in the video)
    • Put the door handle up into place.
    • Replace the two 10mm bolts.
    • Reconnect the rods to the back of the handle.
    • Replace the plastic cap.
  4. Replacing the Door Panel (6:45 in the video)
    • Line up the door panel and push it into place.
    • Hit the clips in around the door panel.
    • Replace the door handle bezel
    • Replace the two 10mm bolts.
    • Replace the Phillips screw.
    • Put the clip back into place on the window crank and push the crank into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Specialty Tools

  • Paper Clip
  • Putty Knife

How-to Video:

(08:05 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Specialty Tools

  • Paper Clip
  • Putty Knife




Vehicle Fit

  • 1998-2005 Chevy Blazer S10 Exterior Door Handle Front Pair
  • 1998-2004 Chevy S10 Pickup Exterior Door Handle Front Pair
  • 1998-2001 GMC Jimmy S-15 Exterior Door Handle Front Pair
  • 1998-2004 GMC S-15 Sonoma Exterior Door Handle Front Pair
  • 1996-2000 Isuzu Hombre Exterior Door Handle Front Pair
  • 1998-2002 Olds Bravada Exterior Door Handle Front Pair
$32.45
Save 59%
List: $78.95 Save: $46.50
Part #: 1ADHS00100

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est