Replaces

1998-2000 Ford Ranger XL Exterior Door Handle for Models Passenger Side

  • New

This replacement Ford Ranger Pickup Truck door handle is just what you need to get your Ford in good looking form again!

Specifications:

  • RH (Passenger Side) FRONT
  • Replaces dealer part number: F37Z-1022404-A, F37Z1022404A
  • Injected molded plastic with black textured finish
  • Direct replacement for original handle

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door handle (1:07 in the video)
    • Use a Flat blade screwdriver to pry apart the crank handle and remove the T20 screw to remove the crank handle.
    • Remove the two Phillips screws in the door pull and unclip the door pull.
    • With your Phillips screwdriver, remove the screw down by the bottom of the door panel.
    • Pull the door panel off and gently peel back the water shield.
  2. Remove the outside door handle (2:42 in the video)
    • Unclip the door latch rod from the door handle.
    • On the outside of the door, lift the handle to expose to rivets.
    • Use a hammer and punch to punch out the rivets.
    • Take your drill and 1/4 in bit to drill out the rivets.
    • Remove the debris with your flat blade screwdriver.
    • Take your old broken outside door panel out.
  3. Install the new outside door handle. (4:30 in the video)
    • Transfer the top lock rod from the old handle to the new one.
    • Use two bolts and two lock nuts to install the new handle in lieu of the rivets you drilled out earlier.
    • Tighten them down with a socket and ratchet.
    • Clip the door latch rod back into place.
  4. Install the door panel (8:47 in the video)
    • Clip the door panel back on.
    • Secure with the two Phillips screws.
    • Replace the door pull and tighten down the Phillips screws.
    • Re-install the window crank with the T20 Torx screw.
    • Clip down the top of the window crank handle.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

How-to Video:

(10:47 min)

Tools List:

    Drills, Drill Bits & Related

  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set




Vehicle Fit

  • 1993-1997 Ford Ranger Exterior Door Handle Passenger Side
  • 1998-2000 Ford Ranger XL Exterior Door Handle for Models Passenger Side
  • 1994-1997 Mazda B2300 Truck Exterior Door Handle Passenger Side
  • 1998-2000 Mazda B2500 Truck Exterior Door Handle Passenger Side
  • 1994-2000 Mazda B3000 Truck Exterior Door Handle Passenger Side
  • 1994-2000 Mazda B4000 Truck Exterior Door Handle Passenger Side
$20.45
Part #: 1ADHE00084

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est