Replaces

2005-2010 Dodge Dakota Crew Cab Textured Black Exterior Door Handle Rear Pair

Part Details

  • Location: Rear
  • Quantity: Pair
  • Colors: Black

This part replaces:

  • OE # 55275684AB
  • OE # 55275685AB

  • New

These replacement outside door handles have been redesigned and strengthened to correct the earlier breaking problem of the original units. They are just what you need to get your vehicle in good working form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Textured Black Finish
  • Durable construction
  • Direct replacements for original handles

These parts are direct bolt on and are built to strict quality control standards. They are great replacements and have good cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (1:03 in the video)
    • Remove the T40 Torx screw from the inside door handle
    • Remove the Phillips head screw from behind the door panel
    • Remove the Phillips screw from the mirror base trim piece
    • Remove the two Phillips screws from the bottom of the door panel
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the wiring harnesses from the switch panel
    • Lift the door panel up and off
    • Remove the 10mm bolts from the inside door handle mechanism
    • Unclip the latch rod from the inside door handle mechanism
    • Pull off the inside door handle mechanism
    • Carefully peel back the water shield
  2. Removing the Outside Door Handle (3:26 in the video)
    • Reconnect the window switch wiring harnesses
    • Raise the window
    • Disconnect the window switch wiring harnesses
    • Remove the two 8mm nuts from the outside door handle
    • Unclip the latch rod from the outside door handle
    • Unclip the lock rod from the outside door handle
    • Pull the door handle off from the outside of the door
  3. Preparing the New Outside Door Handle (5:09 in the video)
    • Remove the T25 Torx screw from the lock cylinder in the old door handle
    • Pull the lock cylinder out of the old door handle
    • Push the lock cylinder into the new door handle
    • Insert the T25 screw into the new door handle
  4. Installing the New Outside Door Handle (5:49 in the video)
    • Clip the lock rod onto the new outside door handle
    • Put the new handle into place, starting at the back
    • Clip the lock rod into place
    • Clip the latch rod into place
    • Fasten the two 8mm nuts onto the door handle
  5. Reinstalling the Door Panel (7:10 in the video)
    • Put the water shield into place
    • Put the inside door handle mechanism into place
    • Insert the two 10mm bolts into the door handle mechanism
    • Clip the latch rod onto the inside door panel mechanism
    • Push the lock bezel out of the door panel
    • Lift the door panel into place
    • Insert the two Phillips screws at the bottom of the door panel
    • Insert the Phillips screw behind the door handle
    • Insert the Phillips screw into the mirror base trim panel
    • Connect the wiring harnesses to the window switch panel
    • Push the switch panel into place
    • Put the door handle into place
    • Insert the T40 screw into the door handle.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver
  • T40 Torx Bit

  • Wrenches - Metric

  • 10mm Wrench
  • 8mm Wrench

How-to Video:

(10:18 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T25 Torx Driver
  • T40 Torx Bit

  • Wrenches - Metric

  • 10mm Wrench
  • 8mm Wrench



This part replaces:

  • OE # 55275684AB
  • OE # 55275685AB

Vehicle Fit

  • 2005-2010 Dodge Dakota Crew Cab Textured Black Exterior Door Handle Rear Pair
  • 2002-2008 Dodge Ram 1500 Truck Crew Cab Textured Black Exterior Door Handle Rear Pair
  • 2003-2009 Dodge Ram 2500 Truck Crew Cab Textured Black Exterior Door Handle Rear Pair
  • 2003-2009 Dodge Ram 3500 Truck Crew Cab Textured Black Exterior Door Handle Rear Pair
  • 2006-2009 Mitsubishi Raider Crew Cab Textured Black Exterior Door Handle Rear Pair
  • 2011 Ram Dakota Crew Cab Textured Black Exterior Door Handle Rear Pair
$45.95
Save 72%
List: $161.66 Save: $115.71
Part #: 1ADHS00459

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est