1993-1997 Toyota Corolla Smooth Black Exterior Door Handle Front Pair

Part Details

  • Location: Front
  • Quantity: Pair
  • Colors: Black

This part replaces:

  • DORMAN 77462,77464

  • New

These door handles are just what you need to get your vehicle in good looking form again!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Smooth Black Finish
    • Can be painted by the buyer to any color desired or installed as is
  • Replaces dealer part numbers: 69210-02020-C0, 69210-12160, 69220-02020-C0, 69220-12160, 6921002020C0, 6921012160, 6922002020C0, 6922012160, 94852495, 94852496, 94856402, 94856403
  • Durable construction
  • Steel center rods and return springs
  • Direct replacements
  • Fit 4 Door Sedan and Wagon Models only
    • Do NOT fit 2 Door Models

These door handles are great replacements and have good cost savings over the dealer units.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel
    • Remove the Phillips screw in the inside door handle.
    • Unclip the door latch rod.
    • Pry up the corner panel on the inside side of the side mirror.
    • With your screwdrivers, pry up the top of the door pull and remove the two Phillips screws.
    • Pry up the switch panel and unplug it.
    • Use a putty knife to unclip the door panel from the door.
    • Carefully peel back the water shield.
  2. Remove the outside door handle
    • Unbolt the four 10 mm bolts and the one nut to remove the bracket in the door.
    • Reach into the door and unclip the lock and latch rods from the door handle.
    • Remove the two 10 mm bolts in the door handle.
    • Pull the lock cylinder out .
    • Remove the door handle.
  3. Install the new door handle
    • Start bolting in the door handle, putting the lock cylinder in before you finish bolting down the far bolt.
    • Clip in the lock and latch rods to the door handle.
    • Bolt that bracket back in with your 10 mm socket and ratchet.
  4. Put the door panel back on
    • Clip the door panel in, threading the wiring connectors through the door pull.
    • Fasten all the Phillips screws.
    • Plug in the wiring harness to the switch panel.
    • Clip the switch panel and top of the door pull down.
    • Connect the door latch with the lock and latch rods.

How-to Video:

(09:20 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Putty Knife

  • Wrenches - Metric

  • 10mm Wrench

This part replaces:

  • DORMAN 77462,77464

Vehicle Fit

  • 1993-1997 Geo Prizm Smooth Black Exterior Door Handle Front Pair
  • 1993-1997 Toyota Corolla Smooth Black Exterior Door Handle Front Pair
  • 1996-2000 Toyota Rav4 4 Door Smooth Black Exterior Door Handle Front Pair
Save 84%
List: $164.90 Save: $138.45
Part #: 1ADHS00040

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est