Replaces

1998 Ford F150 Truck EGR Valve

Guaranteed to Fit

1998 Ford F150 Truck

Detailed Applications

  • 1998 Ford F150 Truck EGR Valve for V8 4.6L (8th Vin Digit 6)
  • 1998 Ford F150 Truck EGR Valve for V8 4.6L (8th Vin Digit W)

This part replaces:

  • OE # F75Z 9D475 DA
  • STANDARD MOTOR PRODUCTS EGV575T

  • New

This Exhaust Gas Recirculation Valve, is an aftermarket replacement part that has the following specifications:

  • New EGR Valve
  • Replaces one of many dealer part numbers including: F75Z-9D475-DA, F75Z9D475DA
  • Direct Fit
  • Built to strict quality control standards

Note: If you need to match the 8th digit of your VIN (Vehicle Identification Number) to the 8th digit we may have listed in our short description, you can either find your VIN number in the lower driver side corner of the windshield or on your vehicle registration.

If your vehicle is running rough or has failed emissions due to a bad EGR valve then this is the part for you.

The EGR valve in your vehicle is a critical part of the emission reduction system on your vehicle. At certain throttle levels the valve allows exhaust gasses to recirculate through the engine combustion process. This process is key in reducing Oxides of Nitrogen emissions.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Engine Cover (0:40)
    • Remove the two 11mm nuts from the engine cover
    • Lift the engine cover and unclip the hose on the back
  2. Removing the EGR Valve (1:08)
    • Remove the hose from the EGR valve
    • Loosen the nut on the valve with a 1 1/16" wrench
    • Remove the two 10mm bolts from the EGR valve
    • Remove the EGR valve
    • Pry off the gasket if necessary
  3. Installing the New EGR Valve (2:17)
    • Insert the gasket onto the EGR valve
    • Thread the bolts through the valve and insert it into place
    • Tighten the 10mm bolts to the EGR valve
    • Tighten the nut with a 1 1/16" wrench
    • Insert the hose to the EGR valve
  4. Reinstalling the Engine Cover (2:53)
    • Insert the engine cover into place
    • Clip in the hose to the back of the engine cover
    • Tighten the 11mm nuts to the engine cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 1-1/16 Inch Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Item arrived in Australia OK,Very good Seller
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(03:29 min)

Tools List:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 1-1/16 Inch Wrench



This part replaces:

  • OE # F75Z 9D475 DA
  • STANDARD MOTOR PRODUCTS EGV575T

Vehicle Fit

  • 1997 Ford Aerostar EGR Valve for V6 3.0L (8th Vin Digit U)
  • 1999-2000 Ford Contour EGR Valve for V6 2.5L (8th Vin Digit L)
  • 1999-2000 Ford Contour EGR Valve for V6 2.5L (8th Vin Digit G)
  • 1997-2000 Ford Expedition EGR Valve for V8 4.6L (8th Vin Digit 6)
  • 1997-2004 Ford Expedition EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1998-2000 Ford Explorer EGR Valve for V6 4.0L (8th Vin Digit X)
  • 2001-2003 Ford Explorer EGR Valve for V6 4.0L (8th Vin Digit E)
  • 2002-2003 Ford Explorer EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1997-1999 Ford F150 Truck EGR Valve for V8 4.6L (8th Vin Digit 6)
  • 1997-2002 Ford F150 Truck EGR Valve for V8 4.6L (8th Vin Digit W)
  • 2002 Ford F150 Truck EGR Valve for V8 4.6L (8th Vin Digit 6)
  • 1997-1999 Ford F250 Light Duty Truck EGR Valve for V8 4.6L (8th Vin Digit 6)
  • 1997-1999 Ford F250 Light Duty Truck EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1996-2001 Ford Mustang Cobra EGR Valve for V8 4.6L (8th Vin Digit V)
  • 1996-2004 Ford Mustang GT EGR Valve for V8 4.6L (8th Vin Digit X)
  • 2003-2004 Ford Mustang Mach 1 EGR Valve with for V8 4.6L (8th Vin Digit R)
  • 2003-2004 Ford Mustang Cobra EGR Valve for V8 4.6L (8th Vin Digit Y)
  • 2005-2006 Ford Mustang GT EGR Valve for V8 4.6L (8th Vin Digit H)
  • 1997 Ford Ranger EGR Valve for V6 3.0L (8th Vin Digit U)
  • 1998-1999 Ford Ranger EGR Valve for V6 4.0L (8th Vin Digit X)
  • 1996-1997 Ford Thunderbird EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1998 Ford Windstar EGR Valve for V6 3.0L (8th Vin Digit U)
  • 1996 Mazda B3000 Truck EGR Valve for V6 3.0L (8th Vin Digit U)
  • 1996-1997 Mercury Cougar EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1999-2000 Mercury Cougar EGR Valve for V6 2.5L (8th Vin Digit L)
  • 2002 Mercury Mountaineer EGR Valve for V6 4.0L (8th Vin Digit E)
  • 2002-2003 Mercury Mountaineer EGR Valve for V6 4.0L (8th Vin Digit K)
  • 2002-2003 Mercury Mountaineer EGR Valve for V8 4.6L (8th Vin Digit W)
  • 1999-2000 Mercury Mystique EGR Valve for V6 2.5L (8th Vin Digit L)
$49.95
Save 48%
List: $96.47 Save: $46.52
Part #: 1AEGR00028

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est