No makes found.
EGR Valve at 1A Auto
What is an EGR valve and where is it located?
The exhaust gas recirculation valve—EGR valve for short—in your vehicle is a critical part of the emission reduction system. Most commonly located on the intake manifold, the EGR valve uses a signal from the vehicle’s computer or vacuum from the induction system to open a passage and allow the engine’s exhaust gasses to be reintroduced back into the engine, combined with incoming air / fuel mixture. These exhaust gasses reduce the temperature of the combustion, which results in the reduction of harmful nitrogen oxide (NOx) emissions being released into the environment.
How do I know my EGR valve needs to be replaced?
EGR valves can fail by becoming stuck open, allowing for too much exhaust gas to enter the intake; or by being stuck closed, preventing or limiting the amount of exhaust gas to enter the intake. When an EGR valve is stuck in the open position it may result in rough idle, decreased engine performance and increased fuel consumption due to the fact that your vehicle is not burning and using the fuel that is available to burn and use. When an EGR valve is stuck in the closed position it may result in increased NOx emissions and pre-ignition (knock). Failure of any other component of the EGR system such as the EGR pressure sensor or a cracked vacuum line may also result in an inoperative EGR valve. OBDII Check Engine Codes related to EGR valves include:
P0400 - EGR Flow Malfunction
P0401 - Insufficient EGR Flow
P0402 - Excessive EGR Flow
P0403 - EGR Circuit Malfunction
P0404 - EGR Circuit Range / Performance
P0405 - EGR Sensor A Circuit Low
P0406 - EGR Sensor A Circuit High
P0407 - EGR Sensor B Circuit Low
P0408 - EGR Sensor B Circuit High
Can I replace the EGR valve myself?
The EGR valve should be fairly noticable when you first open your hood. The first step reguires the disconnection of the EGR valve wiring harness. Then the valve should be easily removed with a ratchet and socket. The valve should then pull up and off. It's a good idea to scrape off any remaining gasket material with a razor blade before reinstallation—which is simply a reversal of the procedure.
Need an EGR valve replacement?
Having a properly functioning exhaust gas recirculation (EGR) valve in order to reduce nitrogen oxide emissions is important not only to being able to pass several state emissions tests, but also to being a caring driver to those around you and to the environment. If yours has failed and you need an EGR valve replacement, then you have to the right place. Replacement EGR valves from 1A Auto are made to the same specifications as the originals. They will fit and function with no hassle and come with the EGR gasket.
At 1A Auto, shopping for an EGR valve replacement for your car, truck, SUV or van is easy - we're here to help you select the right one for your vehicle! Call our customer service toll free at 888-844-3393 if you have any questions about the product, warranty, compatibility or to purchase, or you can buy online right here at 1AAuto.com. Whether your car or truck needs a new exhaust gas recirculation valve or you are performing preventative maintenance, purchase a new one from 1A Auto today.