Replaces

1992-2003 Ford Crown Victoria Door Lock Actuator (with Bracket) Front Passenger Side

Part Details

  • Front / Rear Location: Front
  • Side Location: Passenger Side

This part replaces:

  • OE # E9OY
  • OE # F3DZ
  • OE # F8AZ54218A42AA
  • Standard Motor Products DLA-25

  • New

This is a power door lock actuator that mounts inside the door. It is designed to REPLACE a broken or missing unit.

Specifications:

  • Fits RH (Passenger Side) FRONT
  • Door Lock Actuator with Bracket
  • Replaces dealer part numbers: E9OY-54218-A42AA, F3DZ-54218-A42AA, F8AZ-54218-A42AA, E9OY54218A42AA, F3DZ54218A42AA, F8AZ54218A42AA
  • Electrically operated, not vacuum
  • Correct electrical connection
  • Anodized steel housing resists corrosion

This power door lock actuator is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Note: This electrical part is tested before it leaves our manufacturer, and is not returnable. It is eligible for exchange only.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove door panel (1:10)
    • Unscrew a few screws and use a putty knife to release the clips.
    • Watch our door panel and replacement videos to learn more.
  2. Step 2: Remove window track (1:43)
    • Use a hammer and punch to knock out the center of the bolt, and use a drill to remove it.
    • Remove the 11 mm bolt.
    • Disconnect the wire connected to the track, taking care not to pull it too hard.
    • Set the track aside in the bottom of the door frame.
  3. Step 3: Remove harness clip (2:45)
    • Remove the harness clip holding the actuator in place with a good pull.
  4. Step 4: Disconnect harness from the actuator (2:58)
    • Use a small screwdriver to pry the tab away and disconnect the harness from the actuator.
  5. Step 6: Prepare new lock actuator (3:55)
    • Put the correct hook on the lock actuator.
    • Put the first O ring on.
    • Slide the farrell on, working 1 tooth over the collar of the hook and the second tooth will go over fairly easily.
    • Slide the second O ring on.
    • Use a little grease to help.
    • Pry the bracket off the old one and push the rivet out.
    • Put the bracket on the new actuator.
    • Secure the bolt with the little nut to help secure it while you snap the bracket back on.
  6. Step 7: Install actuator (5:47)
    • Fit the new actuator into the locking mechanism.
    • Screw those three screws back on with your #3 screwdriver to secure the locking mechanism.
    • Reach in and replace the bolt. Put your harness back in and reclip it.
  7. Step 8: Re-assemble the window track (7:34)
    • Position it back up in line with the bottom of the window.
    • Secure it in place with the bolt.
    • Re-secure the wire connected to the track.
  8. Step 9: Re-assemble the door panel. (8:26)
    • For more information check out our door panel video.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit
  • Drill

  • General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:22 min)

Tools List:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit
  • Drill

  • General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 11mm Wrench



This part replaces:

  • OE # E9OY
  • OE # F3DZ
  • OE # F8AZ54218A42AA
  • Standard Motor Products DLA-25

Vehicle Fit

  • 1992-2003 Ford Crown Victoria Door Lock Actuator (with Bracket) Front Passenger Side
  • 1991-1999 Ford Explorer 4 Door Door Lock Actuator (with Bracket) Front Passenger Side
  • 2001-2003 Ford Explorer Sport Trac Door Lock Actuator (with Bracket) Front Passenger Side
  • 1989 Ford Taurus Door Lock Actuator (with Bracket) Front Passenger Side (Built After 10/89 Production Date)
  • 1990-1995 Ford Taurus Door Lock Actuator (with Bracket) Front Passenger Side
  • 1988-1994 Lincoln Continental Door Lock Actuator (with Bracket) Front Passenger Side
  • 1992-2003 Mercury Grand Marquis Door Lock Actuator (with Bracket) Front Passenger Side
  • 1997-2001 Mercury Mountaineer Door Lock Actuator (with Bracket) Front Passenger Side
  • 1990-1995 Mercury Sable Door Lock Actuator (with Bracket) Front Passenger Side
$ 30.95
Save 72%
List: $112.45 Save: $81.50
Part #: 1ADLA00108

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est