Replaces
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Okay, friends. To get started on this tailgate handle, let's go ahead and lower this. Now, we're gonna remove all of our mounting bolts using a Torx bit.
Let's grab onto this panel and get it out of the way. Now that that's out of the way, let's continue on by removing the rest of our mounting screws here.
Get this out of the way. Now that that's out of the way, we need to continue on by releasing these clips right here. Just come underneath the edge with a nice flat screwdriver and pop it right up. That's gonna release this bar right there and do the same to this one. Moving along, you're gonna see two mounting nuts, go ahead and remove the pair of those.
Lift up all nuts, and now let's go ahead and get this handle up here. There it is, friends. Now, it's going to be time to install our brand new handle. Let's come in from the outside, and you swoop it in just like this, curb it. There we are. Now, let's put on this little bracket here. And of course, our mounting nuts. I like to spray this pivot point with a little bit of penetrant so it flows nice and easy.
Now, let's move along to putting on the rods. Just kind of line them up in there. Lock it in. Do the same to the other one. Perfect.
Let's get our panels back on here. Let's get this cover back on here. We're gonna start in all of our mounting bolts and then we'll snug them up. Let's snug all these up now. Okay, one last test. Perfect.
Tools used
Tools used
