Replaces

1998-2003 Dodge Durango Power Window Regulator with Motor Rear Door Pair

Part Details

  • Operation: Power

This part replaces:

  • DORMAN 741-598,741-599
  • OE # 55256495AF
  • OE # 5073325AC
  • OE # 55256494AF
  • OE # 55256494AI

  • New

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Power operation
  • Include Power Window Motors
  • Direct bolt on
  • Built to strict quality control standards
  • Motors and regulators are pre-assembled for easier installation

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money,and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
  • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it, you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the door panel (1:00 in the video)
    • See our other videos for more detailed instructions.
  2. Remove the speaker and water shield (1:20 in the video)
    • Three Phillips screws secure the speaker
    • This allows you to peel back the water shield more to give you more working room.
  3. Remove the window regulator (1:32 in the video)
    • Remove the two 10 mm bolts securing the window to the regulator
    • Tape the window up and out of the way.
    • Unbolt the window regulator and motor using your 10 mm socket and ratchet.
    • Disconnect the wiring harness from the window motor
    • Pull the regulator and motor out.
  4. Install the new window regulator (4:55 in the video)
    • Feed the window regulator and motor into the door.
    • Thread the wiring harness through the door and connect
    • Bolt the window regulator back onto the door.
    • Un-tape the window and carefully slide it down into the regulator and secure with your 10 mm socket and ratchet.
  5. Put the water shield and door panel back on (7:44 in the video)
    • Put the water shield and speaker back on.
    • Use your Phillips screwdriver to re-install the speaker.
    • Reconnect the speaker lead.
    • To see more detailed instructions on reassembling your door panel, see our other videos.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

How-to Video:

(09:00 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • DORMAN 741-598,741-599
  • OE # 55256495AF
  • OE # 5073325AC
  • OE # 55256494AF
  • OE # 55256494AI

Vehicle Fit

  • 2000-2004 Dodge Dakota Quad Cab Power Window Regulator with Motor Rear Door Pair
  • 1998-2003 Dodge Durango Power Window Regulator with Motor Rear Door Pair
$115.45
Save 59%
List: $281.95 Save: $166.50
Part #: 1AWRK00088

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est