1998-2000 Dodge Durango Fog / Driving Light Passenger Side

Part Details

  • Location: Passenger Side

This part replaces:

  • HOLLANDER 116-01086R
  • OE # 55076792

  • New

This replacement fog driving light is just what you need to get your vehicle in good looking form again!

Fog Light Specifications;

  • RH (Passenger Side)
  • Replaces dealer part numbers: 55076792, 55077266AA
  • Bumper Mounted
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. To change the bulbs
    • Under the bumper you can access the assembly.
    • Unplug the wiring connection.
    • Untwist the bulb.
  2. Remove the headlight assembly.
    • Remove the T10 Torx screw between the parking and headlight.
    • Pull the parking light assembly out and disconnect the bulbs.
    • Remove the three 10 mm bolts now exposed.
    • Unclip the headlight assembly and transfer the clip back onto the vehicle.
  3. Remove the fog light assembly
    • Now you can access the two 10 mm bolts at the top of the fog light assembly.
    • Remove the fog light.
  4. install the new fog light assembly
    • Put the assembly into place.
    • Mount with the two 10 mm bolts.
    • Plug in the bulbs and wiring harness.
  5. Install the headlight assembly
    • Plug in the wiring harness and bulbs.
    • Clip the headlight in and bolt the headlight in with your socket and ratchet.
    • Plug in your three bulbs and mount your parking light.
    • Secure with the T10 Torx screws.

How-to Video:

(05:52 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T10 Torx Driver

This part replaces:

  • HOLLANDER 116-01086R
  • OE # 55076792

Vehicle Fit

  • 1997-2000 Dodge Dakota Fog / Driving Light Passenger Side
  • 1998-2000 Dodge Durango Fog / Driving Light Passenger Side
Part #: 1ALFL00225

- Ships Same Day for orders placed by 5 P.M. ET


Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!


hablamos Español:866-401-3393
For Orders Placed By 5pm Est