Replaces

2006-2007 Chevy Monte Carlo Front CV Axle Shaft Pair (excluding SS Models)

  • New

These axle shafts are new, aftermarket parts. They are just what you need to get your vehicle back in good working order!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 88965657, 88965658
  • Approximate Dimensions:
    • Height: 5.00 inches
    • Length: 29.5 inches
    • Width: 5.00 inches
  • Built to strict quality control standards

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:42 in the video)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Axle (1:50 in the video)
    • Remove the hub nut
    • Hit the axle with a hammer
    • Remove the two 21mm bolts at the bottom of the strut with a piece of pipe for leverage
    • Hammer the bolts out
    • Place a drip pan underneath the axle
    • Pry from the back of the axle with a pry bar and hammer
    • Hammer the axle again to loosen it
    • Pull the wheel knuckle forward
    • Pull the axle free and move it to the side
    • Hit the axle out of the wheel knuckle with a hammer
    • Pull the axle up and out
  3. Installing the Axle (3:40 in the video)
    • Push the axle into place
    • Push the wheel knuckle onto the axle and push the axle into place
    • Place the wheel knuckle into the strut and replace the two 21mm bolts
    • Torque the 21mm strut bolts to 130 foot-pounds
    • Replace the hub nut
  4. Reattaching the Wheel (5:16 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 foot-pounds
    • Torque the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. Checking the Oil (6:06 in the video)
    • Start the car to warm up the transmission
    • Pull out the dipstick
    • Wipe the dipstick clean
    • Recheck the dipstick
    • Replace the amount of oil you need
    • Check the dipstick again

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Transmission Fluid

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Drain Pan
  • Floor Jack
  • Hammer
  • Jack Stands

How-to Video:

(06:51 min)

Tools List:

    Materials, Fluids, and Supplies

  • Transmission Fluid

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 21mm Socket
  • 35mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Drain Pan
  • Floor Jack
  • Hammer
  • Jack Stands




Vehicle Fit

  • 2005-2009 Buick Allure Front CV Axle Shaft Pair
  • 2000-2005 Buick Century Front CV Axle Shaft Pair
  • 2005-2009 Buick LaCrosse Front CV Axle Shaft Pair
  • 1998-2004 Buick Regal (excluding Supercharged Models) Front CV Axle Shaft Pair
  • 2000-2003 Chevy Impala Front CV Axle Shaft Pair
  • 2006-2009 Chevy Impala Front CV Axle Shaft Pair (excluding SS Models)
  • 2000-2003 Chevy Monte Carlo Front CV Axle Shaft Pair
  • 2006-2007 Chevy Monte Carlo Front CV Axle Shaft Pair (excluding SS Models)
  • 1999-2005 Chevy Venture Front CV Axle Shaft Pair
  • 1998-2002 Olds Intrigue Front CV Axle Shaft Pair
  • 1997-2004 Olds Silhouette Front CV Axle Shaft Pair
  • 1998-2007 Pontiac Grand Prix Front CV Axle Shaft for Models with for V6 3.8L (excluding Supercharged Models) Pair
  • 2000-2003 Pontiac Grand Prix Front CV Axle Shaft for Models with for V6 3.1L Pair
  • 1999-2005 Pontiac Montana Front CV Axle Shaft Pair
$125.45
Save 91%
List: $1,335.10 Save: $1,209.65
Part #: 1AACS00018

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est