Replaces

2007-2013 Chevy Avalanche 1500 Front CV Axle Shaft

Part Details

  • Location: Front

This part replaces:

  • OE # 15868123
  • HOLLANDER 447-00186

  • New

This axle shaft is a new, aftermarket part. It is just what you need to get your vehicle back in good working order!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 15868123
  • Approximate Dimensions:
    • Length: 22-7/8"
    • Inboard Spline Count: 33
    • Outboard Spline Count: 6 Bolts
  • Built to strict quality control standards
Note: For 2007 truck models, the Classic Body Style has a crease down the center of the door skin, where on the New Body Style, the door skin is smooth. This part is for the New Body Style truck.

Features & Benefits of each NEW CV (Constant Velocity) axle shaft:

  • 100% Neoprene Boots for excellent Ozone resistance. - Eliminates cracking; a leading cause for failure of CV boots
  • 3% moly grease. - Provides excellent high temperature and extreme pressure characteristics which extends the life of the joint
  • Axle nut supplied 100%. - If axle nut from the vehicle is worn or stripped there is no need to buy a separate axle nut because it is provided
  • Splines rolled 100%. - Guarantees proper installation of axle into mating hub and transmission eliminating installation hassle
  • Threads rolled 100%. - Guarantees proper installation of axle nut eliminating installation hassle

Note: This is for one axle shaft assembly. If you need a pair, please see our other listings.

Axle shafts may need replacing for a variety of different reasons. On vehicles that do heavy work or endure other extreme use you can actually break an axle or strip the splines or teeth. More often the CV joint wears out causing noises and vibration while accelerating or turning.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:12 in the video)
    • Remove the three 18mm nuts holding the top of the strut
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Stabilizer Link (2:14 in the video)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with a 15mm wrench
    • Remove the lower nut from the stabilizer link with a 15mm wrench
    • Pull off the stabilizer link
  3. Removing the Suspension (2:50 in the video)
    • Remove the shock strut with a 15mm socket and ratchet
    • Press down on the suspension and pull the strut down and out
  4. Removing the Axle (3:34 in the video)
    • Remove the center cap with a hammer and chisel and flat blade screwdriver
    • Have an assistant hold the brakes
    • Remove the 36mm nut from the hub
    • Place a flat blade screwdriver in the brake rotor
    • Remove the six 15mm bolts holding the axle to the differential
    • Pull the axle out of the differential
    • Remove the axle
  5. Installing the Axle (4:50 in the video)
    • Insert the axle into the hub
    • Insert the other end into the differential
    • Insert and tighten the six 15mm bolts
    • Torque the 15mm bolts between 55 and 60 foot-pounds
  6. Installing the Suspension (5:41 in the video)
    • Tighten the 18mm nuts to the top of the strut by hand
    • Insert the strut into place
    • Insert and tighten the 15mm bolt and clips to the bottom of the strut
    • Torque the 15mm bolt between 70 and 75 foot-pounds
  7. Reinstalling the Stabilizer Link (7:00 in the video)
    • Push the stabilizer link into place
    • Tighten the upper nut onto the stabilizer link with a 15mm wrench
    • Hold the upper nut with a 15mm wrench
    • Fasten the lower nut onto the stabilizer link with a 15mm wrench
  8. Reattaching the Wheel (7:18 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the three 18mm nuts to the top of the strut
    • Tighten the 18mm nuts to 70 foot-pounds

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 22mm Socket
  • 36mm Socket

  • Specialty Tools

  • Assistant

How-to Video:

(08:18 min)

Tools List:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 22mm Socket
  • 36mm Socket

  • Specialty Tools

  • Assistant



This part replaces:

  • OE # 15868123
  • HOLLANDER 447-00186

Vehicle Fit

  • 2007-2013 Cadillac Escalade Front CV Axle Shaft
  • 2007-2013 Cadillac Escalade ESV Front CV Axle Shaft
  • 2007-2013 Cadillac Escalade EXT Front CV Axle Shaft
  • 2007-2013 Chevy Avalanche 1500 Front CV Axle Shaft
  • 2007 Chevy Silverado 1500 New Body Style Front CV Axle Shaft
  • 2008-2013 Chevy Silverado 1500 Front CV Axle Shaft
  • 2007-2013 Chevy Suburban 1500 Front CV Axle Shaft
  • 2007-2013 Chevy Tahoe Front CV Axle Shaft
  • 2007 GMC Sierra 1500 New Body Style Front CV Axle Shaft
  • 2008-2013 GMC Sierra 1500 Front CV Axle Shaft
  • 2007 GMC Sierra Denali 1500 New Body Style Front CV Axle Shaft
  • 2008-2010 GMC Sierra Denali 1500 Front CV Axle Shaft
  • 2011-2013 GMC Sierra Denali 1500 Front CV Axle Shaft
  • 2007-2013 GMC Yukon Front CV Axle Shaft
  • 2007-2013 GMC Yukon XL 1500 Front CV Axle Shaft
  • 2007-2013 GMC Yukon XL Denali Front CV Axle Shaft
$115.45
Save 67%
List: $354.63 Save: $239.18
Part #: 1AACV00084

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est