1996-1996 Jeep Cherokee Crankshaft Position Sensor for L6 4.0L (8th Vin Digit S) with for Automatic Transmission1AECS00020
This part replaces:
- STANDARD MOTOR PRODUCTS PC169
- OE # 56041819AA
- OE # 56027865
This replacement Crankshaft Position Sensor is just what you need to get your vehicle in good running condition again!
A bad or malfunctioning crank sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.
This Crank Sensor features:
- Built to strict quality control standards
- Replaces dealer part numbers: 56041819AA, 56027865, 56027865AB
- Direct replacement
- 100% factory tested
- 3 terminal Plug
- Fits the following Chrysler engines as listed per application:
- L4 2.5L (8th Vin Digit P)
- L6 4.0L (8th Vin Digit S) w/Manual Transmission
Your Engine size can usually be found on a white sticker in the engine compartment near the radiator. If needed, your VIN code is the 8th digit of your vehicles Vehicle Identification number. The VIN can be found on the bottom drivers side corner of the windshield and on your registration. Some refer to the VIN code as the Serial Number.
These are electrical parts and are all tested before they leave our warehouse. This electrical item is not returnable, it is only eligible for exchange.
- 1997-2002 Dodge Dakota Crankshaft Position Sensor for L4 2.5L (8th Vin Digit P)
- 1996 Jeep Cherokee Crankshaft Position Sensor for L6 4.0L (8th Vin Digit S) with for Automatic Transmission
- 1997-2000 Jeep Cherokee Crankshaft Position Sensor for L4 2.5L (8th Vin Digit P)
- 1997-2004 Jeep Wrangler Crankshaft Position Sensor for L6 4.0L (8th Vin Digit S) with Manual Transmission
- 1997-2002 Jeep Wrangler Crankshaft Position Sensor for L4 2.5L (8th Vin Digit P)