1993-1995 Jeep Wrangler Crankshaft Position Sensor for Models with Manual Transmission1AECS00013
This part replaces:
- OE # 56026882
- Standard Motor Products PC41T
- Reference Number PC41
This replacement Crankshaft Position Sensor is just what you need to get your vehicle in good running condition again!
A bad or malfunctioning crank sensor will often cause a service engine light error code, and or cause a no start condition, or rough running due to inaccurate ignition and fuel timing.
- Built to strict quality control standards
- Replaces dealer part number: 56026882, 56026921, 56027031, 56029621
- Direct replacement
- 100% factory tested
Your Engine size can usually be found on a white sticker in the engine compartment near the radiator. If needed, your VIN code is the 8th digit of your vehicles Vehicle Identification number. The VIN can be found on the bottom drivers side corner of the windshield and on your registration. Some refer to the VIN code as the Serial Number.
These are electrical parts and are all tested before they leave our warehouse. This electrical item is not returnable, it is only eligible for exchange.
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 1996 Dodge Dakota Crankshaft Position Sensor for L4 2.5L
- 1993-1995 Jeep Cherokee Crankshaft Position Sensor for Models with Manual Transmission
- 1993 Jeep Grand Cherokee Crankshaft Position Sensor for L6 4.0L
- 1993-1995 Jeep Wrangler Crankshaft Position Sensor for Models with Manual Transmission
Part #: 1AECS00013
Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."- Dwuan M.