Replaces

2004-2005 GMC Envoy XUV Cooling Fan Clutch (Dorman)

This part replaces:

  • OE # 15293048, 25790869
  • Dorman 622-001
  • HOLLANDER 326-748

  • New

DORMAN 622-001 [FAN CLUTCH]

This cooling fan clutch assembly is a high quality aftermarket, ready to bolt on, direct replacement part. This is an electrically activated fan clutch.

Specifications:

  • Brand new Dorman Fan Clutch
  • New, not rebuilt, electric clutch
  • Replaces dealer part number: 15293048, 25790869
  • Replaces Connection part number: 2120000
  • Replaces original assemblies that are melted or worn out
  • Comes with proper plug for trouble free installation
  • Direct replacement
  • Built to strict quality control standards

This cooling fan clutch assembly is built to strict quality control standards and makes a great replacement.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Air Intake Hose (0:42 in the video)
    • Remove the hose clamps from the air intake hose with a flat blade screwdriver
    • Remove the T30 Torx screw from the air box
    • Pull the air intake hose up and out
  2. Removing the Serpentine Belt (1:12 in the video)
    • Familiarize yourself with the route of the serpentine belt
    • Insert a 15mm socket and ratchet into the tensioner
    • Turn the socket and pull the belt over the center pulley
    • Release the tensioner
    • Pull the belt off by hand
  3. Removing the Radiator Fan Clutch (1:48 in the video)
    • Loosen the four 13mm bolts on the radiator fan
    • Tighten the 13mm bolts by hand
    • Insert a fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and loosen the clutch
    • Hold the pulley and twist the fan to start remove the fan clutch from the shaft
    • Remove the four 13mm bolts
    • Shake the fan to loosen it from the clutch
    • Hold on to the fan clutch and twist the water pump to remove the fan
    • Pull the fan and clutch up
    • Disconnect on the radiator fan wiring harnesses
    • Pry out the clip in the radiator fan
    • Reach behind the radiator fan and remove the radiator fan and clutch
  4. Installing the New Radiator Fan Clutch (5:12 in the video)
    • Place the clutch in the fan with the harness on the driver side
    • Place the radiator fan down in smooth side in front
    • Lower the fan and clutch down into place
    • Push the clutch out of the fan
    • Reconnect the wiring harnesses
    • Push the clip into the radiator fan
    • Pull the clutch up and back through the fan onto the water pump pulley
    • Turn the pulley to twist it back into the clutch
    • Line up the fan on the clutch
    • Insert and tighten the four 13mm bolts
    • Twist the clutch on as far as possible
    • Insert the fan clutch pulley wrench into the pulley
    • Place an adjustable wrench in and tighten the clutch
  5. Installing the Serpentine Belt (7:50 in the video)
    • Loop the belt around the crank shaft pulley
    • Bring it around the water pump
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Bring it around the belt tensioner
    • Pull the tensioner clockwise with the 15mm socket and ratchet
    • Release the tensioner
    • Make sure the belt is on the correct pulleys
  6. Installing the Air Intake Hose (9:06 in the video)
    • Insert the air intake hose into place
    • Tighten the two hose clamps with a flat blade screwdriver
    • Insert and tighten the T30 Torx bolt

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Fan clutch wrench

  • Torx Drivers & Sockets

  • T30 Torx Driver

How-to Video:

(10:06 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Fan clutch wrench

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • OE # 15293048, 25790869
  • Dorman 622-001
  • HOLLANDER 326-748

Vehicle Fit

  • 2004-2007 Buick Rainier Cooling Fan Clutch (Dorman)
  • 2002-2007 Chevy Trailblazer Cooling Fan Clutch (Dorman)
  • 2002-2006 Chevy Trailblazer EXT Cooling Fan Clutch (Dorman)
  • 2002-2007 GMC Envoy Cooling Fan Clutch (Dorman)
  • 2002-2006 GMC Envoy XL Cooling Fan Clutch (Dorman)
  • 2004-2005 GMC Envoy XUV Cooling Fan Clutch (Dorman)
  • 2003-2007 Isuzu Ascender Cooling Fan Clutch (Dorman)
  • 2002-2004 Olds Bravada Cooling Fan Clutch (Dorman)
  • 2005-2007 Saab 9-7X Cooling Fan Clutch (Dorman)
$155.45
Save 69%
List: $497.62 Save: $342.17
Part #: DMRFA00002

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Dorman
Brand #: 622-001

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est