Replaces

1995-2000 Chrysler Cirrus Front Lower Control Arm with Ball Joint Driver Side

Part Details

  • Front / Rear Location: Front
  • Location: Lower

This part replaces:

  • HOLLANDER 512-1126L, 512-1297L, 512-1338
  • DORMAN 520-301 BRANDED
  • OE # 4616923
  • OE # 4764501AC

  • New

This replacement front lower control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits LH (Driver Side) FRONT LOWER
  • Replaces dealer part number: 4616923, 4764501AC, 4764501AE
  • Includes new ball joint and bushings
  • Control arm is new, not remanufactured or refurbished
  • Does NOT fit Coupe Models

Worn ball joints or loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front lower control arm with the loose bushings or worn ball joints with our high quality all in one replacement.

One way to diagnose a loose, or warn ball joint on a control arm, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint and bushings for play, if it is moving you probably need to replace it.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    It is recommended to receive a professional alignment after completing this repair

  1. Removing the Wheel (0:43)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Outer Tie Rod (1:05)
    • Use a pair of pliers to straighten the cotter pin and remove it
    • Remove the castle nut with an adjustable wrench
    • Measure the distance from the inner tie rod to the outer tie rod
    • Loosen the nut between the inner and outer tie rod
    • Hammer the knuckle to loosen the outer tie rod
    • Remove the outer tie rod and twist it off the inner tie rod
  3. Installing the Outer Tie Rod (2:05)
    • Twist the grease filler into the new outer tie rod
    • Twist the outer tie rod to the inner tie rod
    • Measure the distance and make sure it matches the recorded distance
    • Tighten the nut between the inner and outer tie rod
    • Insert the outer tie rod to the knuckle
    • Replace and tighten the castle nut while lining up the cotter pin hole
    • Insert the cotter pin and twist the ends with a pair of pliers
    • Fill up the grease filler with a grease gun
  4. Reattaching the Wheel (3:21)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer
  • Measuring Tape
  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Specialty Tools

  • Grease Gun


How-to Video:

(03:52 min)

Tools List:

    General Tools

  • Hammer
  • Measuring Tape
  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Specialty Tools

  • Grease Gun



This part replaces:

  • HOLLANDER 512-1126L, 512-1297L, 512-1338
  • DORMAN 520-301 BRANDED
  • OE # 4616923
  • OE # 4764501AC

Vehicle Fit

  • 1995-2000 Chrysler Cirrus Front Lower Control Arm with Ball Joint Driver Side
  • 1996-2006 Chrysler Sebring Front Lower Control Arm with Ball Joint Driver Side (Except Coupe)
  • 1995-2000 Dodge Stratus Front Lower Control Arm with Ball Joint Driver Side
  • 2001-2006 Dodge Stratus Sedan Front Lower Control Arm with Ball Joint Driver Side
  • 1996-2000 Plymouth Breeze Front Lower Control Arm with Ball Joint Driver Side
$70.95
Save 77%
List: $310.00 Save: $239.05
Part #: 1ASLF00044

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est