Replaces

1992-2001 Toyota Camry Front Lower Control Arm Pair

Part Details

  • Quantity: Pair

This part replaces:

  • OE # 48069-33020
  • OE # 48069-33031
  • OE # 48068-33020
  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L
  • Hollander 512-58385AL
  • Hollander 512-58289R
  • Hollander 512-58385AR

  • New

These replacement front lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT LOWER
  • Include new bushings
  • Control arms are new, not remanufactured or refurbished
  • Do NOT include Ball Joint

Worn loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace those heavily rusted, rotted, or damaged front lower control arms with the loose bushings with our high quality all in one replacements.

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:38)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Control Arm (3:26)
    • Remove the two 17mm nuts connecting the ball joint to the control arm
    • Remove the 17mm bolt connecting the ball joint to the control arm
    • Separate the ball joint from the control arm with a pry bar
    • Remove the two 19mm bolts from the front of the control arm
    • Remove the 19mm bolt from the rear of the control arm
    • Remove the control arm with a pry bar
  3. Installing the Control Arm (6:25)
    • Put the rear control arm bushing into place
    • Start the 19mm bolt into the control arm bushing
    • Position the control arm, using a pry bar if necessary
    • Insert the longer 19mm bolt into the rear of the control arm bracket
    • Insert the shorter 19mm bolt into the front of the control arm bracket
    • Pry the control arm into place
    • Fasten the 17mm nuts onto the ball joint bracket
    • Insert the 17mm bolt into the ball joint bracket
    • Tighten the two 17mm nuts to 94 foot-pounds of torque
    • Tighten the 17mm bots to 94 foot-pounds
    • Tighten the three 19mm bolts to 152 foot-pounds
  4. Reattaching the Wheel (9:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 19mm Socket
  • 17mm Socket
  • 12mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Does this replace the stock sway bar that goes from left front tire to the right front tire? Or am I looking at wrong product.? ?
Jessi S on Feb 6, 2016
BEST ANSWER: Hello, These are control arms and attach your suspension from the wheel to the chassis. If you are looking for an anti-sway bar and end links, feel free to call us at 888-844-3393 for part specialist assistance.

How-to Video:

(11:29 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 19mm Socket
  • 17mm Socket
  • 12mm Socket



This part replaces:

  • OE # 48069-33020
  • OE # 48069-33031
  • OE # 48068-33020
  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L
  • Hollander 512-58385AL
  • Hollander 512-58289R
  • Hollander 512-58385AR

Vehicle Fit

  • 1992-2001 Lexus ES300 Front Lower Control Arm Pair
  • 1999-2003 Lexus RX300 Front Lower Control Arm Pair
  • 1995-1997 Toyota Avalon Front Lower Control Arm Pair
  • 1992-2001 Toyota Camry Front Lower Control Arm Pair
$ 75.95
Save 80%
List: $384.42 Save: $308.47
Part #: 1ASFK00064

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est