Replaces

2003-2006 Chevy SSR Front Upper Control Arm Passenger Side

Part Details

  • Location: Upper
  • Location: Front
  • Location: Passenger Side

This part replaces:

  • DORMAN 520-144
  • OE # 15858683
  • HOLLANDER 511-01054R

  • New

This replacement front upper control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits Passenger Side Front Upper control arm
  • Includes new inner bushings
  • Replaces dealer part number:15858683
  • Control arm is new, not remanufactured or refurbished

Worn ball joints or loose rear bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front upper control arm with the loose bushings or worn ball joints with our high quality all in one replacement.

One way to diagnose a loose, or warn ball joint on a control arm, is to jack the car up, so the wheel is off of the ground, then have someone try to move the wheel in and out. While they are moving the wheel check the ball joint and bushings for play, if it is moving you probably need to replace it.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:41 in the video)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Control Arm (1:03 in the video)
    • Apply penetrating oil to the 15mm bolt that holds the control arm to the steering knuckle Remove the 15mm bolt that holds the control arm to the steering knuckle
    • Pry the brake line from its clips with a flat blade screwdriver
    • Strike the control arm with a hammer to separate it from the steering knuckle
    • Secure the knuckle with wire ties, wire, or string
    • Apply penetrating oil to the two 21mm control arm bolts
    • Remove one 21mm bolt from the control arm
    • Loosen the other 21mm bolt
    • Push out the second 21mm bolt with a hammer and a flat blade screwdriver
    • Pull off the control arm
    • Strike the remaining bolt out of the control arm with a hammer
  3. Installing the New Control Arm (3:52 in the video)
    • Pry the brake line clips out of the control arm with a flat blade screwdriver
    • Push the new control arm into place
    • Start the two 21mm bolts into the control arm
    • Tighten the two 21mm bolts preliminarily
    • Remove whatever is securing the wheel knuckle
    • Put the control arm onto the wheel knuckle
    • Tap the control arm onto the wheel knuckle using a hammer
    • Start the 15mm bolt and nut that hold the control arm to the steering knuckle
    • Tighten the 15mm bolt to 50 foot-pounds of torque
    • Push the brake line clips onto the new control arm
    • Clip the brake line into the clips
  4. Reattaching the Wheel (6:11 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Penetrating Oil
  • Wire Ties
  • Wire or String

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 15mm Wrench
  • 21mm wrench

How-to Video:

(07:28 min)

Tools List:

    Materials, Fluids, and Supplies

  • Penetrating Oil
  • Wire Ties
  • Wire or String

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Wrenches - Metric

  • 15mm Wrench
  • 21mm wrench



This part replaces:

  • DORMAN 520-144
  • OE # 15858683
  • HOLLANDER 511-01054R

Vehicle Fit

  • 2004-2007 Buick Rainier Front Upper Control Arm Passenger Side
  • 2003-2006 Chevy SSR Front Upper Control Arm Passenger Side
  • 2002-2009 Chevy Trailblazer Front Upper Control Arm Passenger Side
  • 2002-2006 Chevy Trailblazer EXT Front Upper Control Arm Passenger Side
  • 2002-2009 GMC Envoy Front Upper Control Arm Passenger Side
  • 2002-2006 GMC Envoy XL Front Upper Control Arm Passenger Side
  • 2004-2005 GMC Envoy XUV Front Upper Control Arm Passenger Side
  • 2003-2008 Isuzu Ascender Front Upper Control Arm Passenger Side
  • 2002-2004 Olds Bravada Front Upper Control Arm Passenger Side
  • 2005-2009 Saab 9-7X Front Upper Control Arm Passenger Side
$53.45
Save 33%
List: $80.02 Save: $26.57
Part #: 1ASFU00020

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est