Replaces

2002-2009 Chevy Trailblazer Tail Light with Circuit Board Driver Side

Part Details

  • Side Location: Driver Side

This part replaces:

  • PARTSLINK GM2800150
  • OE # 15097513
  • HOLLANDER 166-1960

  • New

This replacement Chevy Trailblazer tail light is just what you need to get your SUV in good looking form again!

Specifications

  • LH (Driver side)
  • Direct bolt on
  • Replaces dealer part numbers: 15131578, 16532713
  • Includes circuit board as shown
  • Built to strict quality control standards
  • Injection molded plastic
  • Department of Transportation (DOT) and Society of Automotive Engineers (SAE) approved

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Chevy Trailblazer tail light makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. Remove the tail light assembly (0:21 in the video)
    • Open the tail gate and remove the two Phillips screws.
    • Pull the tail light assembly out.
    • Disconnect the wiring harness from under the vehicle and remove the bulbs.
    • Service your bulbs at this point or put your bulbs in the new tail light assembly.
  2. Install the tail light assembly (1:40 in the video)
    • Plug in the bulbs and wiring harness.
    • Clip the tail light assembly into the vehicle.
    • Screw in the two Phillips screws
    • Close the tail gate.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

How-to Video:

(03:15 min)

Tools List:

    Screwdrivers & Related

  • Phillips Head Screwdriver



This part replaces:

  • PARTSLINK GM2800150
  • OE # 15097513
  • HOLLANDER 166-1960

Vehicle Fit

  • 2002-2009 Chevy Trailblazer Tail Light with Circuit Board Driver Side
  • 2002-2006 Chevy Trailblazer EXT Tail Light with Circuit Board Driver Side
$48.45
Part #: 1ALTL00277

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est