Replaces

2005-2008 Cadillac STS Front Brake Pad & Rotor Kit Ceramic for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto CD921, 18060686

Part Details

  • Front / Rear Location: Front
  • Brake Pad Friction Material: Ceramic

This part replaces:

  • Nakamoto CD921, 18060686

  • New

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 88964102
  • Fits 5 Stud Wheels
  • Vented
  • 11.92" (303mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads and Rotor (2:30)
    • Remove the T30 Torx bolt from the rotors
    • Remove the two 18mm bolts holding the caliper bracket
    • Remove the brake caliper
    • Secure the caliper with a bungee chord
    • Loosen the two 18mm bolts from the caliper carrier bracket
    • Remove both 18mm bolts from the carrier bracket
    • Remove the carrier
    • Remove the rotor
  3. Preparing the Brake Pads and Rotor (5:19)
    • Clean the hub with a wire brush
    • Apply a thin coat of brake grease to the hub
    • Remove the old pads
    • Remove the metal slides
    • Clean the metal slide with a wire brush
    • Clean the caliper carrier seats for the slides with a wire brush
    • Insert the slide into place
    • Remove the brake pad slides
    • Clean off the brake grease
    • Apply a thin coat of brake grease to the slides
    • Insert the slides into their boots
  4. Installing the Brake Pads and Rotor (7:43)
    • Insert the rotor into place
    • Add brake parts cleaner to the rotor
    • Thread the T30 Torx bolt into place
    • Lower the brake caliper bracket to the rotor
    • Tighten the two 18mm bolts to the caliper bracket
    • Torque the 18mm bolts to 96 foot-pounds
    • Apply brake grease to the contact points of the pads where they touch the metal slides
    • Apply brake grease to the back of the brake pads
    • Lower the caliper from the bungee chord
    • Compress the pistons with vise-grips or a C-clamp
    • Insert the caliper into place
    • Start the two 18mm bolts to the brake caliper
    • Torque the bolts to 46 foot-pounds
  5. Reattaching the Wheel (10:55)
    • Slide the wheel into place
    • Start the 19mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:48 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Nakamoto CD921, 18060686

Vehicle Fit

  • 2003-2005 Cadillac CTS Front Brake Pad & Rotor Kit Ceramic for Models with RPO Code FE3 (Sport Suspension) Nakamoto CD921, 18060686
  • 2005-2008 Cadillac STS Front Brake Pad & Rotor Kit Ceramic for Models with RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) Nakamoto CD921, 18060686
$ 89.95
Save 74%
List: $347.96 Save: $258.01
Part #: 1ABFS01067

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Nakamoto
Brand #: CD921, 18060686

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est