Replaces

Brake Rotor Rear Pair - 1ABFS00168

Part Details

  • Front / Rear Location: Rear
  • Quantity: Pair

  • New

This brake rotor pair is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver) & RH (Passenger) Side Rear
  • Replaces dealer part number: 15712801
  • Fits 8 Stud Wheels

This brake rotor PAIR makes a great replacement and has an excellent value over the price of a dealer brake rotor pair.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel. (1:22 in the video)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. Step 2: Remove the calipers (2:00 in the video)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new rotor and pads (7:45 in the video)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. Step 5: Put wheel back on (12:50 in the video)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brakes (13:20 in the video)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 16mm Socket
  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Block of Wood
  • Floor Jack
  • Hammer
  • Large C-Clamp
  • Wire Brush

How-to Video:

(14:05 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 16mm Socket
  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Block of Wood
  • Floor Jack
  • Hammer
  • Large C-Clamp
  • Wire Brush




Vehicle Fit

  • 2003-2013 Chevy Express 2500 Van Rear Brake Rotor for 8 Lug Wheel Pair
  • 2003-2013 Chevy Express 3500 Van Rear Brake Rotor Pair for Models with Single Rear Wheels (SRW)
  • 2004 Chevy Silverado 1500 Crew Cab Rear Brake Rotor for 8 Lug Wheel Pair
  • 2001-2003 Chevy Silverado 1500 HD Rear Brake Rotor Pair
  • 2005-2007 Chevy Silverado 1500 HD Rear Brake Rotor Pair
  • 1999-2000 Chevy Silverado 2500 Rear Brake Rotor Pair (excluding Quadrasteer)
  • 2001-2004 Chevy Silverado 2500 Rear Brake Rotor Pair (excluding Quadrasteer) (excluding HD Models)
  • 2000-2007 Chevy Suburban 2500 Rear Brake Rotor Pair
  • 2003-2013 GMC Savana 2500 Van Rear Brake Rotor for 8 Lug Wheel Pair
  • 2003-2013 GMC Savana 3500 Van Rear Brake Rotor Pair for Models with Single Rear Wheels (SRW)
  • 2004 GMC Sierra 1500 Crew Cab Rear Brake Rotor for 8 Lug Wheel Pair
  • 2001-2003 GMC Sierra 1500 HD Rear Brake Rotor Pair
  • 2005-2007 GMC Sierra 1500 HD Rear Brake Rotor Pair
  • 1999-2000 GMC Sierra 2500 Rear Brake Rotor Pair (excluding Quadrasteer)
  • 2001-2004 GMC Sierra 2500 Rear Brake Rotor Pair (excluding Quadrasteer) (excluding HD Models)
  • 2000-2007 GMC Yukon XL 2500 Rear Brake Rotor Pair
$89.45
Save 60%
List: $224.00 Save: $134.55
Only 2 left in stock
Part #: 1ABFS00168

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est