Replaces

1999-2001 Chrysler LHS Front Brake Rotor

Part Details

  • Location: Front

This part replaces:

  • HOLLANDER 530-02022

  • New

This front brake rotor is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Sold individually 1 Rotor
  • Direct replacement
  • Fits 5 Lug Wheel
  • 11-11/16 inch Diameter

This brake rotor makes a great replacement and has an excellent value over the price of a dealer brake rotor.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Remove the wheel
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. Inspect and remove the brakes
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 10 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and pry off the caliper.
    • Remove the rotor.
  3. Install the new disc brakes
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 10 mm socket.
    • Torque the 10 mm bolts to 25 ft lbs.
  4. Mount the wheel
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

How-to Video:

(08:52 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush



This part replaces:

  • HOLLANDER 530-02022

Vehicle Fit

  • 1999-2004 Chrysler 300M Front Brake Rotor (excluding Performance Brakes)
  • 1998-1999 Chrysler Concorde Front Brake Rotor for Models with 16 Inch Wheels
  • 2000-2004 Chrysler Concorde Front Brake Rotor
  • 1999-2001 Chrysler LHS Front Brake Rotor
  • 1998-1999 Dodge Intrepid Front Brake Rotor for Models with 16 Inch Wheels
  • 2000-2002 Dodge Intrepid Front Brake Rotor for Base & ES Models with 16 Inch Wheels
  • 2003-2004 Dodge Intrepid Front Brake Rotor
$41.45
Part #: 1ABRR00067

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est