Replaces

1997-1998 Nissan 240SX Front Premium Posi Semi-Metallic Brake Pads with 5 Lug Wheels & with ABS

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Part Type: Premium Posi

  • New

Specifications:

  • Premium Posi SEMI-METALLIC Disc Brake Pads
  • 4 Piece Front brake pad set
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Remove your wheel (1:04)
    • Loosen your lug nuts with a tire iron.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. Remove the calipers (1:31)
    • Use a breaker bar and a 14 mm socket to remove the two caliper bolts.
    • With a flat blade screwdriver pry in between the pads and rotor to compress the caliper piston
    • Pull the caliper off the rotor.
    • Remove and discard your old brake pads.
    • Now remove the two 17 mm caliper bracket bolts with a socket and breaker bar.
    • Clean up the caliper bracket with a wire brush.
  3. Remove the rotor (4:36)
    • Hit the rotor with penetrating oil
    • Use a hammer and gently but firmly tap it to work the rotor off.
    • Clean up your new rotor with brake cleaner.
    • Put the brake rotor onto the hub.
  4. install the calipers (6:23)
    • Mount the caliper brackets.
    • Torque the 17 mm bolts to 95 ft lbs
    • Use a c-clamp to compress the caliper
    • Apply anti-seize grease to the edges of the new brake pads and insert them into the brake bracket.
    • Mount the caliper onto the caliper bracket.
    • Torque the 14 mm bolts to 22 ft lbs.
  5. put the wheel back on (9:44)
    • Replace the wheel and hub cap
    • Preliminarily tighten the lug nuts.
    • Lower the vehicle.
    • Torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump your brakes and do 5 and 10 mph test stops before driving the vehicle somewhere.

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:42 min)

Tools List:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket




Vehicle Fit

  • 1991-1996 Infiniti G20 Front Premium Posi Semi-Metallic Brake Pads
  • 1989-1993 Nissan 240SX Front Premium Posi Semi-Metallic Brake Pads with ABS
  • 1996 Nissan 240SX Front Premium Posi Semi-Metallic Brake Pads with 5 Lug Wheels (Built After 7/96 Production Date)
  • 1997-1998 Nissan 240SX Front Premium Posi Semi-Metallic Brake Pads with 5 Lug Wheels & with ABS
  • 1997-1998 Nissan 240SX Front Premium Posi Semi-Metallic Brake Pads (Without ABS Brakes)
  • 2000-2006 Nissan Sentra Front Premium Posi Semi-Metallic Brake Pads for L4 1.8L
  • 1990-1992 Nissan Stanza Front Premium Posi Semi-Metallic Brake Pads
$25.95
Only 1 left in stock
Part #: 1ABPS00116

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est