Replaces

1999-2003 Acura TL Front Brake Pads Semi-Metallic Nakamoto MD787

Part Details

  • Brake Pad Friction Material: Semi-Metallic

This part replaces:

  • Nakamoto MD787

  • New

Specifications:

  • Professional grade Semi-Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:54)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If necessary, kick the tire to loosen the wheel
  2. Inspecting the Brakes (1:30)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. Removing the Brake Pads (2:12)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. Removing the Brake Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the screws from the brake rotor with an impact screwdriver
    • If you cannot remove the screws, drill them out
    • Pull the rotor off
  5. Installing the New Brake Rotor (5:58)
    • Slide the rotor on
    • Insert the screws into the new rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to between 85 - 90 foot-pounds of torque
  6. Installing the New Brake Pads (7:44)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the 14mm bolts to between 18 - 20foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. Reattaching the Wheel (9:07)
    • Turn the rotor straight
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern
  8. Testing the Brakes (9:44)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • General Tools

  • Floor Jack
  • Large C-Clamp
  • Jack Stands
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Impact Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:17 min)

Tools List:

    Drills, Drill Bits & Related

  • 1/4 Inch Drill Bit
  • Drill

  • General Tools

  • Floor Jack
  • Large C-Clamp
  • Jack Stands
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Impact Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 18mm Socket



This part replaces:

  • Nakamoto MD787

Vehicle Fit

  • 2001-2003 Acura CL Front Brake Pads Semi-Metallic Nakamoto MD787
  • 1999-2004 Acura RL Front Brake Pads Semi-Metallic Nakamoto MD787
  • 1999-2003 Acura TL Front Brake Pads Semi-Metallic Nakamoto MD787
  • 2004-2006 Acura TL Front Brake Pads Semi-Metallic for Models with Automatic Transmission Nakamoto MD787
  • 2007-2008 Acura TL Front Brake Pads Semi-Metallic (excluding Type S) Nakamoto MD787
  • 2004-2010 Acura TSX Front Brake Pads Semi-Metallic Nakamoto MD787
  • 2003-2007 Honda Accord Coupe Front Brake Pads Semi-Metallic for V6 3.0L Manual Transmission Nakamoto MD787
  • 2009-2010 Honda Accord EX Front Brake Pads Semi-Metallic Nakamoto MD787
  • 2006-2007 Honda Accord Hybrid Front Brake Pads Semi-Metallic Nakamoto MD787
Part #: 1ABPS00067

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Nakamoto
Brand #: MD787

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est