Replaces

1998-2002 Dodge Neon Rear Brake Pads Semi-Metallic

Part Details

  • Front / Rear Location: Rear

This part replaces:

  • HOLLANDER MD658

  • New

This rear brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece REAR Brake Pad Set
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (1:29)
    • Pry the pads into the caliper with a pry bar to reset the pistons
    • Remove the two 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Unclip the brake pads from the caliper
    • Pull the brake pads out of the caliper
  3. Inspecting the Brakes (3:03)
    • Check the thickness of the brake pads
    • Check that the brake caliper slides move smoothly
    • Check for gouges on both sides of the brake rotor
  4. Removing the Brake Rotor (3:44)
    • Slide off the brake rotor
    • If the rotor does not come off easily, adjust the emergency brake
    • Pull off the rubber plug from the backing plate with a flat blade screwdriver
    • Turn the star wheel adjuster down with a brake spoon
  5. Installing the New Brake Rotor (5:10)
    • Slide on the brake rotor
    • Turn the star wheel adjuster up with a brake spoon, while turning the rotor
    • Push the rubber plug into the backing plate
  6. Installing the New Brake Pads (5:41)
    • Push the brake pads into the caliper
    • Put the caliper into place
    • Start the 10mm bolts into the caliper
    • Tighten the 10mm bolts to about 20 foot-pounds of torque
  7. Reattaching the Wheel (7:59)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

  • Specialty Tools

  • Brake Spoon

How-to Video:

(08:54 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

  • Specialty Tools

  • Brake Spoon



This part replaces:

  • HOLLANDER MD658

Vehicle Fit

  • 1999-2004 Chrysler 300M Rear Brake Pads Semi-Metallic
  • 1995-2000 Chrysler Cirrus Rear Brake Pads Semi-Metallic
  • 1995-2004 Chrysler Concorde Rear Brake Pads Semi-Metallic
  • 1995-2001 Chrysler LHS Rear Brake Pads Semi-Metallic
  • 2000-2002 Chrysler Neon Rear Brake Pads Semi-Metallic
  • 1995-1996 Chrysler New Yorker Rear Brake Pads Semi-Metallic
  • 2001-2002 Chrysler PT Cruiser Rear Brake Pads Semi-Metallic
  • 2003-2007 Chrysler PT Cruiser Rear Brake Pads Semi-Metallic (excluding Turbo Models)
  • 1996-2006 Chrysler Sebring Rear Brake Pads Semi-Metallic (Except Coupe)
  • 1995-2004 Dodge Intrepid Rear Brake Pads Semi-Metallic
  • 1998-2002 Dodge Neon Rear Brake Pads Semi-Metallic
  • 2003-2004 Dodge Neon Rear Brake Pads Semi-Metallic (excluding Turbo Models)
  • 1995-2006 Dodge Stratus Sedan Rear Brake Pads Semi-Metallic
  • 1995-1997 Eagle Vision Rear Brake Pads Semi-Metallic
  • 1995-2000 Plymouth Breeze Rear Brake Pads Semi-Metallic
  • 1998-2001 Plymouth Neon Rear Brake Pads Semi-Metallic
$30.45
Part #: 1ABPS00638

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est