Replaces

1997-1999 Buick Riviera Rear Brake Pad Set SEMI-METALLIC ( Raybestos)

Part Details

  • Brake Options: Semi-Metallic
  • Location: Rear
  • Brands: Raybestos

This part replaces:

  • Raybestos SGD714M

  • New

RAYBESTOS SERVICE GRADE REAR BRAKE PAD SET: SGD714M

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Specifications:

  • Brand New Raybestos Rear Brake Pad Set
  • Material: Semi-metallic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 171593, 171618, 171640, 171642, 18024926, 18024930, 18029826, 18040160, 18043995, 18043999, 21022052, 21013126

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel. (1:17 in the video)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. Step 2: Remove the calipers (1:50 in the video)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new rotor and pads (6:10 in the video)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. Step 5: Put wheel back on (10:40 in the video)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brakes (11:00 in the video)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

  • Specialty Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

How-to Video:

(11:29 min)

Tools List:

    Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

  • Specialty Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush



This part replaces:

  • Raybestos SGD714M

Vehicle Fit

  • 2000-2005 Buick LeSabre Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-2005 Buick Park Avenue Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-1999 Buick Riviera Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-1999 Cadillac Concours Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-2005 Cadillac Deville Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-2002 Cadillac Eldorado Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997 Cadillac SLS Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997 Cadillac STS Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997 Cadillac Seville Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 2003-2004 Cadillac Seville Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1998-1999 Chevy Lumina Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1998-1999 Chevy Monte Carlo Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1997-2003 Olds Aurora Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 2000-2005 Pontiac Bonneville Rear Brake Pad Set SEMI-METALLIC ( Raybestos)
  • 1991-2002 Saturn SC Coupe Rear Brake Pads Semi-Metallic (Raybestos)
  • 1991-1998 Saturn SL Sedan Rear Brake Pads Semi-Metallic (Raybestos)
  • 1993-1998 Saturn SW Wagon Rear Brake Pads Semi-Metallic (Raybestos)
$31.95
Part #: RABPS00034

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates
Raybestos
Brand #: SGD714M

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est