Replaces

2002-2002 Subaru Impreza Brake Pads for H4 2.5L RS Front Premium Posi Semi-Metallic Nakamoto MD929

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi

This part replaces:

  • Nakamoto MD929

  • New

Specifications:

  • Premium Posi SEMI-METALLIC Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:23)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. Inspecting the Brakes (1:37)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gauges on both sides of the rotor
    • Check the thickness of the brake pads
  3. Removing the Brakes (2:56)
    • Remove the 14mm bolts from the caliper
    • Slide the boots in
    • Pull off the caliper
    • Slide out the brake pads
    • Check the caliper slides for smooth movement
    • If necessary clean the slides with a wire brush and grease them
    • Pull the brake pad retainers off the caliper bracket
    • If reusing the retainers, clean them with a wire brush
    • Apply penetrating oil to the 17mm bolts and to the rotor around the lugs
    • Remove the 17mm bolts from the caliper bracket using a breaker bar or pipe for leverage
    • Remove the caliper bracket
    • Pull the rotor off
  4. Installing the New Brakes (6:42)
    • Insert the caliper bracket between the rotor and the steering knuckle
    • Start the bolts by hand and tighten them with the ratchet
    • Tighten the bracket bolts to 85 foot-pounds with the torque wrench
    • Push the caliper pistons in using a large C-clamp and the old brake pad
    • Reattach the brake pad retainers
    • Insert the inner brake pad with the wear tab at the bottom
    • Insert the outer pad
    • Put the caliper in place
    • Start the caliper bolts by hand
    • Tighten the caliper bolts to 20 foot-pounds
  5. Reattaching the Wheel (10:45)
    • Straighten out the steering knuckle
    • Slide the Wheel into place
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot pounds in a crossing or star pattern
  6. Testing the Brakes (11:16)
    • Pump your brakes repeatedly
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:47 min)

Tools List:

    General Tools

  • Floor Jack
  • Wire Brush
  • Large C-Clamp
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 17mm Socket



This part replaces:

  • Nakamoto MD929

Vehicle Fit

  • 2005-2006 Saab 9-2X Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2003-2006 Subaru Baja Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2003-2010 Subaru Forester Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2002 Subaru Impreza Brake Pads for H4 2.5L RS Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2003-2011 Subaru Impreza Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2003-2011 Subaru Impreza Outback Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2004-2005 Subaru Impreza WRX Brake Pads Front Semi-Metallic Premium Posi Nakamoto MD929
  • 2008-2011 Subaru Impreza WRX Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2002 Subaru Legacy GT Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2003-2004 Subaru Legacy Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2005 Subaru Legacy Brake Pads (excluding Turbo Models) Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2006-2013 Subaru Legacy Brake Pads (excluding GT Models) (excluding Turbo Models) Front Premium Posi Semi-Metallic Nakamoto MD929
  • 2002-2013 Subaru Outback Brake Pads Front Premium Posi Semi-Metallic Nakamoto MD929
Part #: 1ABPS00357

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates
Nakamoto
Brand #: MD929

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est