Replaces

2008-2013 GMC Sierra 1500 Front Semi-Metallic Brake Pads

Part Details

  • Location: Front
  • Brake Options: Semi-Metallic

  • New

Specifications:

  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (1:07 in the video)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:25 in the video)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. Removing the Brake Pads (1:47 in the video)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. Removing the Brake Rotor (2:44 in the video)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. Installing the New Brake Rotor (4:08 in the video)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. Installing the New Brake Pads (5:32 in the video)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. Reattaching the Wheel (7:29 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. Testing the Brakes (7:53 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Brake Fluid
  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Torx Drivers & Sockets

  • T30 Torx Driver

How-to Video:

(08:17 min)

Tools List:

    Materials, Fluids, and Supplies

  • Brake Fluid
  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

  • Specialty Tools

  • A Piece of Pipe (for leverage)
  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Torx Drivers & Sockets

  • T30 Torx Driver




Vehicle Fit

  • 2008-2013 Cadillac Escalade Front Semi-Metallic Brake Pads
  • 2008-2013 Cadillac Escalade ESV Front Semi-Metallic Brake Pads
  • 2008-2013 Cadillac Escalade EXT Front Semi-Metallic Brake Pads
  • 2009-2013 Cadillac Escalade Hybrid Front Semi-Metallic Brake Pads
  • 2008-2013 Chevy Avalanche 1500 Front Semi-Metallic Brake Pads
  • 2009-2013 Chevy Express 1500 Van Front Semi-Metallic Brake Pads
  • 2008-2013 Chevy Silverado 1500 Front Semi-Metallic Brake Pads
  • 2009-2013 Chevy Silverado Hybrid Front Semi-Metallic Brake Pads
  • 2008-2013 Chevy Suburban 1500 Front Semi-Metallic Brake Pads
  • 2008-2013 Chevy Tahoe Front Brake Pads Semi-Metallic (excluding Police Package)
  • 2008-2013 Chevy Tahoe Hybrid Front Semi-Metallic Brake Pads
  • 2009-2013 GMC Savana 1500 Van Front Semi-Metallic Brake Pads
  • 2008-2013 GMC Sierra 1500 Front Semi-Metallic Brake Pads
  • 2008-2010 GMC Sierra Denali 1500 Front Semi-Metallic Brake Pads
  • 2009-2013 GMC Sierra Hybrid Front Semi-Metallic Brake Pads
  • 2008-2013 GMC Yukon Front Semi-Metallic Brake Pads
  • 2008-2013 GMC Yukon Hybrid Front Semi-Metallic Brake Pads
  • 2008-2013 GMC Yukon XL 1500 Front Semi-Metallic Brake Pads
$55.45
Only 4 left in stock
Part #: 1ABPS00686

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est