Replaces

2001-2003 Chrysler Voyager Front Brake Pads CERAMIC for Models with Rear Drum Brakes ( Raybestos)

This part replaces:

  • Raybestos SGD856C

  • New

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD SET: SGD856C

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Specifications:

  • Brand New Raybestos Front Brake Pad Set
  • Material: Ceramic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking
  • Replaces dealer part numbers: 05019984AA, 05139899AA, 5019984AA, 5139899AA, V1013984

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:44 in the video)
    • Pry off the wheel cover with a flat blade screwdriver
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Inspecting the Brakes (1:08 in the video)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. Removing the Brakes (1:46 in the video)
    • Remove the two 12mm bolts from the brake caliper
    • Pry the caliper piston in with a flat blade screwdriver
    • Pull the caliper aside and wire-tie it into place
    • Pry the brake pads out of the caliper with a flat blade screwdriver
    • Remove the two 21mm bolts from the back of the caliper bracket
    • Remove the caliper bracket
    • Pull the rotor off
  4. Preparing the New Brake Pads and Rotors (3:10 in the video)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
    • Grease the caliper slides
  5. Installing the New Brakes (4:06 in the video)
    • Slide the rotor on
    • Install the caliper bracket and the 21mm bolts
    • Torque the 21mm bolts to 85 ft/lbs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Check that the caliper slides move freely
    • If necessary, apply grease to the caliper slides
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the two 12mm bolts by hand
    • Tighten bolts to between 20 - 25 foot-pounds of torque
  6. Reattaching the Wheel (5:43 in the video)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
  7. Testing the Brakes (6:19 in the video)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Wrenches - Metric

  • 12mm Wrench
  • 19mm Wrench
  • 21mm wrench

How-to Video:

(06:58 min)

Tools List:

    Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Wrenches - Metric

  • 12mm Wrench
  • 19mm Wrench
  • 21mm wrench



This part replaces:

  • Raybestos SGD856C

Vehicle Fit

  • 2001-2006 Chrysler Town & Country Front Brake Pads CERAMIC for Models with Rear Drum Brakes ( Raybestos)
  • 2001-2003 Chrysler Voyager Front Brake Pads CERAMIC for Models with Rear Drum Brakes ( Raybestos)
  • 2001-2007 Dodge Caravan Front Brake Pads CERAMIC for Models with Rear Drum Brakes ( Raybestos)
  • 2001-2007 Dodge Grand Caravan Front Brake Pads CERAMIC for Models with Rear Drum Brakes ( Raybestos)
  • 2002-2007 Jeep Liberty Front Brake Pads CERAMIC ( Raybestos)
$37.95
Part #: RABPS00067

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates
Raybestos
Brand #: SGD856C

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est