Replaces

Brake Pad & Rotor Kit - 1ABFS00055

  • New

Hearing squeaking noises from the wheels? This may be the wear tabs on the brake shoes saying, "it is time for replacement." Aging brakes can also result in a pulsation from the brake pedal or long stopping distances. Brakes should be inspected every 10,000 miles or any time the tires are removed. They may need frequent replacement such as every 20,000 miles if used in stop and go traffic. Brakes can last longer if the vehicle is used primarily for long highway trips.

Specifications:

  • Includes 2 front rotors & a front brake pad set
  • Fits Driver & Passenger Side Front
  • Rotors with 5 lugs
  • Rotors include ABS sensor rings
  • Semi-Metallic brake pads
  • Direct replacements

This front brake pad & rotor kit makes a great replacement and has an excellent value over the price of dealer brake pads & rotors.

Note:
The rotors do not include wheel bearings or seals.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. Step 1: Remove wheel. (1:11 in the video)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. Step 2: Remove the calipers (1:35 in the video)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 3/8 Allen bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Compress the caliper piston with a c-clamp.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. Step 3: Install new rotor and pads (7:15 in the video)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the 3/8 Allen bolts to 25-30 ft lbs.
  4. Step 5: Put wheel back on (9:42 in the video)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100-120 ft lbs.
    • Replace hubcap/center cap.
  5. Step 6: Test and set brakes (10:08 in the video)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

How-to Video:

(10:35 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

  • Specialty Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush




Vehicle Fit

  • 1995-1998 Chevy C1500 Truck Front Brake Pad & Rotor Kit Semi-Metallic for Models with 5 Lug Wheels
  • 1996-2002 Chevy Express 1500 Van Front Brake Pad & Rotor Kit Semi-Metallic
  • 1995-1999 Chevy Suburban C1500 2 Wheel Drive Front Brake Pad & Rotor Kit Semi-Metallic for Models with 5 Lug Wheels
  • 1995-1999 Chevy Tahoe Front Brake Pad & Rotor Kit Semi-Metallic 2 Wheel Drive
  • 1995-1998 GMC C1500 Truck Front Brake Pad & Rotor Kit Semi-Metallic
  • 1996-2002 GMC Savana 1500 Van Front Brake Pad & Rotor Kit Semi-Metallic
  • 1995-1999 GMC Suburban C1500 2 Wheel Drive Front Brake Pad & Rotor Kit Semi-Metallic for Models with 5 Lug Wheels
  • 1995-1999 GMC Yukon Front Brake Pad & Rotor Kit Semi-Metallic 2 Wheel Drive
$106.95
Save 48%
List: $205.35 Save: $98.40
Part #: 1ABFS00055

Out of Stock

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est