1994-1997 Chevy Camaro Front Semi-Metallic Brake Pad & Rotor Kit1ABFS00001
- Brake Options: Semi-Metallic
Hearing squeaking noises from the wheels? This may be the wear tabs on the brake shoes saying, "it is time for replacement." Aging brakes can also result in a pulsation from the brake pedal or long stopping distances. Brakes should be inspected every 10,000 miles. They may need frequent replacement such as every 20,000 miles if used in stop and go traffic. Brakes can last longer if the vehicle is used primarily for long highway trips.
- Includes 2 front rotors & a front brake pad set
- Fits Driver & Passenger Side Front
- Semi-Metallic brake pads
- Direct replacements
Frequently asked Questions:
- How difficult is it to change pads and rotors?
1. Jack up and properly support the vehicle.
2. Remove the wheel.
3. Remove the caliper mounting bolts. The caliper bolts are usually allen head bolts located at the inside upper corners of the calipers. After removing, clean these bolts with a wire brush and apply some grease to the head surfaces before reinstallation.
4. Remove the caliper by pulling up and forward. Remove the brake shoes from the caliper. Match the old shoes to the new shoes.
5. Use a large c-clamp to force the caliper piston back in to the caliper. Brake fluid may need to be removed from the fluid reservoir during this step. Be sure to align the clamp properly so as not to damage the piston. If you have multi-piston calipers use the old brake shoe to distribute the force of the clamp evenly.
6. Support the caliper. Do not stress the rubber line between the caliper and vehicle. Inspect this line, if it shows any sign of wear replace it.
7. Remove the rotor. The rotor on this vehicle pulls off the wheel hub. A rubber mallet can be carefully used to break the rotor free of the hub.
8. Reverse the procedure to reinstall the rotor, brake shoes, caliper and wheel. Be sure to torque all bolts to the proper specifications. Always do final tightening by hand do not use air impact tools.
9. Repeat for the opposite side.
10. IMPORTANT - Start the car and pump the brake pedal. It may take a few pumps before the calipers and shoes reseat properly on the rotor. Check the fluid again before operating.
- My car has anti-lock (ABS) brakes does this make replacing rotors and pads harder?
- Can I damage my ABS system when replacing the rotors and pads?
- How do I know if my brakes really need replacement?
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Wear and Tear
This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.
- 1994-1995 Buick LeSabre Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1996 Buick Park Avenue Front Semi-Metallic Brake Pad & Rotor Kit
- 1995-1996 Buick Riviera Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1997 Chevy Camaro Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1996 Chevy Lumina APV Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1996 Olds Silhouette Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1997 Pontiac Bonneville Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1997 Pontiac Firebird Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1997 Pontiac Trans Am Front Semi-Metallic Brake Pad & Rotor Kit
- 1994-1996 Pontiac Trans Sport Front Semi-Metallic Brake Pad & Rotor Kit