Replaces

2007-2009 Chrysler Aspen Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic

Part Details

  • Front / Rear Location: Rear
  • Brake Pad Friction Material: Ceramic

  • New

This rear brake kit is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece REAR brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 52009968AC, 52009968AA, 52009968AB
  • Fits 5 Stud Wheels
  • 13.86" diameter

Parking Brake Shoe Specifications:

  • 4 Piece Rear Parking Brake Shoe Set
  • Replaces dealer part numbers: 05080568AA, 5080568AB, 5093703AA
  • Direct replacements
  • Professional Grade Shoe Set
  • Correct for models with rear disc brakes

Parking Brake Hardware Specifications:

  • Will service both LH (Driver Side) & RH (Passenger Side) REAR PARKING BRAKES
  • Kit includes:
    • 6 Springs
    • 4 Retainers
    • 4 Pins
    • 2 Adjusters
  • Direct replacements
  • Built to strict quality control standards

This brake kit makes great replacements and has excellent value over the price of the dealer brakes.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Wheel (0:49)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. Removing the Brake Pads (1:59)
    • Remove the 10mm bolts from the brake caliper slides
    • Pry the caliper out of the bracket from the bottom with a pry bar
    • Remove the two 21mm bolts securing the caliper bracket
    • Remove the caliper and brake pads
    • If only changing the pads, continue to Step 5
  3. Removing the Brake Rotor (2:59)
    • Hit the rotor with a hammer without damaging the studs
    • Remove the rotor
  4. Preparing the New Brake Pads and Rotors (4:16)
    • Remove surface rust or scaling from the hub with a wire brush
    • Apply brake grease to the hub without touching the studs
    • Insert the rotor into place
    • Remove the brake pad clips
    • Clean the surface on the caliper and the brake pad clips with a steel wire brush
    • Apply brakes parts cleaner to the rotor
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
  5. Reinstalling the Brake Caliper (6:58)
    • Insert the two 21mm bolts into the caliper
    • Torque the 21mm bolts to 100 foot-pounds
    • Apply grease to the brake pad tabs
    • Insert the brake pads into the caliper bracket
    • Apply brake grease to the back of the pads
    • Push the slides out of the caliper with vise grips if needed
    • Apply brake grease to the slides
    • Insert the slides into the caliper
    • Slowly compress the piston into the caliper to prevent forcing fluid or blowing a seal with vise grip pliers
    • Insert the caliper onto the bracket
    • Insert and tighten the 10mm bolts
    • Torque the caliper bolts to 22 foot-pounds
  6. Reattaching the Wheel (9:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:44 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 10mm Socket




Vehicle Fit

  • 2007-2009 Chrysler Aspen Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
  • 2009 Chrysler Aspen Hybrid Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
  • 2007-2009 Dodge Durango Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
  • 2007-2008 Dodge Ram 1500 Truck Regular Cab Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
  • 2007-2008 Dodge Ram 1500 Truck Quad Cab Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
  • 2009 Dodge Ram 1500 Truck Rear Brake Pad & Rotor Kit with Parking Brake Shoes & Hardware Ceramic
$ 126.95
Save 43%
List: $224.00 Save: $97.05
Only 2 left in stock
Part #: 1ABCK00015

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est