Replaces

1998-2004 Dodge Intrepid Blower Motor Resistor for Models (without Automatic Temperature Control)

This part replaces:

  • OE # 4885845AA
  • STANDARD MOTOR PRODUCTS RU-105

  • New

This Resistor Blower Motor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.

Specifications:

  • New, not remanufactured or rebuilt
  • Direct replacement
  • Replaces dealer part number: 4885845AA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 5 & 2 Terminal connection
  • 2 bolt mounting flange
  • Only fits models with Manual Air Conditioning (A/C)
    • Does not fit models with Automatic Temperature Control (ATC)

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Blower Motor Resistor
    • Remove the duct panel clip with a flat blade screwdriver or pliers
    • Pull the duct panel out
    • Disconnect the blower motor resistor wiring harness
    • Disconnect the fan lead
    • Remove the 8mm bolts from the blower motor resistor
    • Pull out the blower motor resistor
  2. Installing the New Blower Motor Resistor
    • Push the resistor into place with the snap facing the passenger compartment
    • Start the two 8mm bolts by hand
    • Tighten the 8mm bolts
    • Connect the fan lead
    • Connect the resistor wiring harness
    • Insert the duct panel clip into the duct panel
    • Slide the duct panel into place
    • Push in the clip

How-to Video:

(05:20 min)

Tools List:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Flashlight



This part replaces:

  • OE # 4885845AA
  • STANDARD MOTOR PRODUCTS RU-105

Vehicle Fit

  • 1999-2004 Chrysler 300M Blower Motor Resistor for Models (without Automatic Temperature Control)
  • 2001-2004 Chrysler Concorde Blower Motor Resistor for Models (without Automatic Temperature Control)
  • 1999-2001 Chrysler LHS Blower Motor Resistor for Models (without Automatic Temperature Control)
  • 1998-2004 Dodge Intrepid Blower Motor Resistor for Models (without Automatic Temperature Control)
$22.45
Part #: 1AHBR00013

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est