Replaces

2003-2008 Audi A4 Wagon Front Power Window Regulator without Motor Pair

Part Details

  • Operation: Power
  • Quantity: Pair
  • Regulator Option: without Motor

This part replaces:

  • OE # 8E0837461C
  • OE # 8E0837462C

  • New

These replacement power window regulators are just what you need to get your vehicle in good shape again!

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT DOOR
  • Replaces dealer part numbers: 8E0 837 461 C, 8E0837461C, 8E0837462C, 8E0 837 462 C
  • Power operation
  • Direct replacements
  • Built to strict quality control standards
  • Correct for sedan & wagon models only
    • does not fit convertible models

These power window regulators make great replacements and have good cost savings over the dealer units.

Installation:

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

Please Note:  These window regulators are designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note: We are committed to offering the absolute best value for our customers. If you want a highest quality window regulator at a great price, please see our other "High Quality" window regulator listings. If price is your main concern, we are offering this economy style window regulator as well. It is the same one that most internet sellers are offering. While this window regulator is a good replacement, it is not backed by the same warranty as our high quality regulator.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (0:33)
    • Lift the hood
    • Pull back the weatherstrip and disconnect the battery
    • Disconnect the negative battery terminal
    • Pop off the trim button below the door pull
    • Pry off the silver trim piece with a flat blade screwdriver
    • Remove the two screws on the bottom of the door panel
    • Remove the four screws from the top of the door panel
    • Pry out the door panel with a door panel removal tool
    • Pull the door panel up and off
    • Disconnect the door latch cable
    • Disconnect the speaker wiring harness
    • Pry the orange safety clip on the switch panel wiring harness
    • Remove the three T25 Torx screws from the window motor
    • Disconnect the three wiring harnesses from the window motor
    • Remove the T25 screws from the sensor
    • Carefully peel off the water shield
    • Remove the three T35 black screws from the speaker
    • Disconnect the other speaker wiring harness
    • Pull the speaker out, up, and off
    • Pry out the two trim panels at the corner of the door with a flat blade screwdriver
    • Pry off the weatherstrip with needle nose pliers
  2. Removing the Window Frame (5:21)
    • Remove the two T25 Torx screws from the bottom of the regulator
    • Disconnect the side view mirror wiring harness
    • Pull the side mirror wiring from its clips to release it from the door
    • Remove the four T45 bolts from the door frame
    • Remove the black phosphate coated T45 bolt from the door frame
    • Pull the weatherstrip off the side of the door frame
    • Pry out the rubber trim button on the side of the door
    • Remove the T45 Torx bolt below the rubber trim
    • Push the blue regulator motor caps through the door
    • Pull the window frame up and out
  3. Removing the Window Regulator (7:28)
    • Remove the two T25 bolts that hold the window to the regulator
    • Disconnect the orange clips from the window
    • Slide the window out by hand
    • Remove the two T25 bolts from the window track
    • Pull the window regulator out
  4. Installing the Window Regulator (8:23)
    • Make sure the regulator cables are aligned
    • Tighten the two T25 bolts that hold the window to the regulator
    • Cut the wire ties off the new regulator motor with pliers
    • Align the window with the window track
    • Slide the window up to secure it in place
    • Slide the regulator's rails into the brackets on the window
    • Tighten the bottom two T25 Torx bolts
    • Slide the window up
  5. Installing the Window Frame (10:45)
    • Remove the wire clips in the door frame
    • Insert the regulator assembly into place
    • Push the power mirror harness into the door
    • Insert the T45 Torx bolt to the side of the door
    • Insert the top T45 bolts to the door frame
    • Tighten the two T25 bolts that hold the window to the regulator
    • Insert the speaker into place
    • Tighten the three T35 black screws to the speaker
    • Insert the weatherstrip into place
    • Push on the rubber trim on the side of the door
    • Push the power mirror harness into place
    • Carefully push the watershield into place
    • Tighten the sensor with two T25 torx screws
    • Push the speaker wire leads into place
    • Insert the window motor into place
    • Tighten the three T25 screws to the motor
    • Insert the three connectors to the motor
    • Strap in the mirror wiring harness
  6. Installing the Door Panel (15:29)
    • Push the orange safety clip forward on the switch panel wiring harness
    • Push the orange safety clip in while reconnecting the wiring harness
    • Click the speaker wire back in
    • Connect the door latch cable
    • Lift the door panel up into place
    • Push the door panel clips in
    • Insert the four screws into the top of the door panel
    • Insert the two screws underneath the door pull
    • Insert the silver trim panel into place
    • Push on the trim button below the door pull

Tools needed for replacement:

    General Tools

  • Flashlight

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver
  • T45 Torx Socket
  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(19:04 min)

Tools List:

    General Tools

  • Flashlight

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver
  • T45 Torx Socket
  • T25 Torx Driver



This part replaces:

  • OE # 8E0837461C
  • OE # 8E0837462C

Vehicle Fit

  • 2002 Audi A4 (From VIN 140001) Front Power Window Regulator without Motor Pair
  • 2003-2008 Audi A4 Wagon Front Power Window Regulator without Motor Pair
  • 2003-2008 Audi A4 Sedan Front Power Window Regulator without Motor Pair
  • 2007 Audi RS4 Front Power Window Regulator without Motor Pair
  • 2008 Audi RS4 Sedan Front Power Window Regulator without Motor Pair
  • 2004-2008 Audi S4 Wagon Front Power Window Regulator without Motor Pair
  • 2004-2008 Audi S4 Sedan Front Power Window Regulator without Motor Pair
$ 69.95
Save 76%
List: $296.00 Save: $226.05
Part #: 1AWRK00282

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY M-F
For Orders Placed By 5pm Est