Air Filter Housing
Air Filter Housing at 1A Auto
What is an Air Filter Box and where is it Located?
The air cleaner housing assembly, also commonly referred to as an air box or air filter housing, serves as the mounting point for the air filter and protects it from the various harsh elements that could weaken and damage it. The air filter in turn is then able to do its job of filtering out any impurities in the air before it is then fed into the engine. The air box can be found in front of the fender inside the engine compartment. A typical air filter housing will have an air inlet on one side of the filter to allow in the fresh air and an outlet on the other side of the box that goes to the air intake hose leading to the throttle body on the engine. Some air filter boxes may also have baffles inside to quiet engine noise, air intake temperature sensors, or mass air flow sensors.
When do I Need to Replace my Air Cleaner Housing?
The air cleaner housing assembly is not a part that requires regular maintenance or replacement. However, since it is made of plastic, it can crack from pressure or extreme environmental conditions. Many air boxes are also broken when changing the filter; sometimes the person performing the maintenance does not know where all the bolts are or exactly how the box comes apart so they try to "force" it and the box breaks. Improper installation may also lead to broken closure clips or stripped screw holes, as well as to over-tightened mounting bolts that can cause the area around them to break. Lastly, due to its location in the engine bay, they are often broken when the vehicle is in an accident.
Breaks and cracks in the air box can disrupt the air flow which can lead to rough running and poor fuel economy. A broken air box can also allow unwanted dirt and contaminants to enter into your vehicle’s engine. This can foul your mass air flow sensor which is an expensive repair and / or prematurely wear out your engine which is an even more costly repair. Therefore, if your vehicle’s air cleaner housing assembly needs to be replaced, it is imperative that you do so as soon as possible.
Replacing an Air Filter Housing
Replacing the air filter housing is generally an easy and straight forward job. Make sure to remove and transfer any sensors located in the old box into the new one. Disconnect the engine inlet air hose on the outlet of the housing. Remove the air filter and check for any damage or contaminants, and replace if necessary. Remove any mounting hardware and the housing should be free to pull out.
Need an Air Cleaner Housing Replacement?
Is your vehicle’s air filter box broken? If so, then you have come to the right place for a replacement. At 1A Auto, we have quality, aftermarket air cleaner housing assembly replacements for many makes and models, and at great prices. Our air cleaner housings are built to strict quality control standards, and are reinforced in weak areas to resist cracking and breaking. That means you save money in the long run.
Shopping for an air filter housing replacement for your car, truck, SUV or van is also easy at 1A Auto - we're here to help you select the right part for your vehicle! Call our customer service toll free at 888-844-3393 if you have any questions about our products, warranty, compatibility or to purchase, or you can buy online. So, get your vehicle back in working order again and buy an aftermarket air filter housing replacement for your car or truck from 1A Auto today!