Replaces

1996-1996 Honda Civic 4 Door Sedan Window Regulator Power with Motor (Japan Built Models) Rear Passenger Side

Part Details

  • Operation: Power

This part replaces:

  • OE # 72711S04J02 04721S01A01
  • HOLLANDER 135-58318R
  • DORMAN 741-565

  • New

This replacement power window regulator with motor is just what you need to get your Honda Civic & Acura EL sedan in good shape again!

This power window regulator with motor features the following specifications:

  • RH (Passenger Side) REAR DOOR
  • Replaces dealer part numbers: 04721-S01-A00, 04721-S01-A01, 72715-ST0-013, 72155ST0013
  • Power operation
  • Direct replacement
  • Includes power window motor already assembled to regulator
  • Built to strict quality control standards
  • Only fits 4 Door Sedan Models

NOTE: If the 1st digit of the VIN is a J, the vehicle is a Japan built model.

This Honda Civic & Acura EL sedan power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Installation

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

 

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (0:44 in the video)
    • Pry off the trim piece on the door pull with a flat blade screwdriver
    • Remove the two Phillips head screws inside the door pull
    • Remove the Phillips head screw inside the door handle
    • Pull back the door handle and disconnect the latch cable from the door handle
    • Disconnect the wiring harnesses
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Carefully peel off the water shield
  2. Removing the Window Regulator (2:02 in the video)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Hold the window in place with painter's tape
    • Remove the wiring harness out of the door
    • Disconnect the window motor lead
    • Remove the four 10mm bolts from the regulator
    • Pull the window regulator out through the door
  3. Reinstalling the Regulator (3:50 in the video)
    • Insert two of the top bolts into the window regulator
    • Push the regulator into the door
    • Hang the regulator by its bolts
    • Insert the rest of the 10mm bolts into the regulator
    • Connect the wiring harness
    • Connect the wiring harness to the door
    • Remove the painter's tape from the window
    • Lower the window onto the regulator
    • Insert the two 10mm bolts that hold the window to the regulator
  4. Reinstalling the Door Panel (5:42 in the video)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Connect the wiring harnesses
    • Connect the latch cable from the door handle
    • Insert the Phillips screw into the door handle
    • Insert the two Phillips screws into the door pull
    • Push on the trim piece on the door pull

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife

How-to Video:

(07:16 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool
  • Putty Knife



This part replaces:

  • OE # 72711S04J02 04721S01A01
  • HOLLANDER 135-58318R
  • DORMAN 741-565

Vehicle Fit

  • 1997-2000 Acura EL 4 Door Sedan Window Regulator Power with Motor Rear Passenger Side
  • 1996 Honda Civic 4 Door Sedan Window Regulator Power with Motor (Japan Built Models) Rear Passenger Side
  • 1997-2000 Honda Civic 4 Door Sedan Window Regulator Power with Motor Rear Passenger Side
$55.45
Part #: 1AWRG00908

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est