1997-1999 Acura CL Strut & Spring Assembly Pair for V6 3.0L V6 Front1ASSP00045
- Quantity: Pair
Designed for easier installation.
This PAIR are a new replacement strut and spring assemblies. We recommend replacing struts in pairs and performing an alignment after replacement.
- Comes as a PAIR
- Fits both the LH (Driver) & RH (Passenger) Side FRONT
Replacement upper mount
Upper and lower spring isolators
Upper spring seat
- Preassembled for easier replacement
- Fits all models with V6
Note: These struts have been designed 5 upper strut mount mounting studs to allow for fitment on multiple models. Two of these studs can be removed, 3 out of the 5 will line up properly.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
- 1997-1999 Acura CL Strut & Spring Assembly Pair for V6 3.0L V6 Front
- 2001-2003 Acura CL Strut & Spring Assembly Pair for V6 3.2L V6 Front
- 1999-2003 Acura TL Strut & Spring Assembly Pair for V6 3.2L V6 Front